Review the Longines Avigation BigEye Titanium Gradient Blue Dial Watch Replica

Review the Longines Avigation BigEye Titanium Gradient Blue Dial Watch Replica

The story of Longines Aviation's BigEye Titanium replica began in the 1930s. At some point in that decade, the original BigEye was born, but no one knew the exact time or purpose. Its existence has not been exposed until recently, when a collector contacted Longines to obtain information about Longines watches from the 1930s. Look, Longines has no record of this watch, which means it may be a one-off prototype. But it caught the attention of their watchmakers, and they quickly decided to re-release it, it's Longines Avigation BigEye Titanium gradient blue Dial replica L2.816.1.93.2.

Blue Dial

The first thing that grabs attention on this new Longines Avigation watch replica is its stunning smoked petrol blue dial. Starting with a bright blue hue at the center and culminating into a deep shade of black towards the outer periphery, this dial is quite dynamic. The other noticeable difference on the dial compared to its elder sibling is the use of custard colored lume on the Arabic numerals. 

Now, I would have preferred the numerals to be painted white, however, the beige color does seem to add slightly more warmth to the dial. The rest of the layout is quite familiar. There are 3 sub-registers at 3, 6 and 9, that can be used to track the chronograph minutes, hours, and running seconds. And just like the previous version, this one also gets an oversized chronograph minute counter that gives the watch its Big Eye name. The hands are still baton-style and the dial remains highly legible and devoid of any clutter. 

41mm Case

The Longines Avigation BigEye Titanium replica has a 41mm diameter that presents a medium wrist presence. It’s perfectly round, with a fat, knurled crown at 3 o’clock, and a pair of smaller pushers at 2 and 4 o’clock. The pushers have a narrow, retro design, and there’s an embossed Longines imprint on the top of the crown.

The case back has a screw-down design, which makes the watch easy to service. At the top, there’s a narrow bezel, another classic touch that also provides more space for a big, broad dial. The crystal is significantly raised, with curved edges that protrude markedly over the bezel. This is another beautiful, classic touch, and it distorts the dial slightly when viewed at an angle. When viewed head-on, there’s no distortion whatsoever.

In all of these respects, the Avigation BigEye Titanium is identical to the original BigEye. However, there’s one important difference, and that’s the material. Because it’s made of grade 5 titanium, this case is much lighter weight than the original. This makes it feel like a smaller watch than it actually is. In addition, titanium is more durable than steel, and has a slightly bluer shine than a straightforward silver-colored stainless. The only real downside is if you were looking a more faithful replica to the original watch. Then again, if that’s what you want, you can always just buy the stainless steel version.

Calibre L688 Movement

Under the screwed caseback is a well-known movement, the Calibre L688. Also named ETA A08.L01, it is a heavily modified Valjoux architecture that now features a column wheel for smoother and more accurate operation of the pushers. This rather noble movement is also providing multiple upgrades and modern features, such as a longer power reserve of 54 hours. Its escapement, classically beating at 4Hz, is also equipped with a silicon balance-spring for enhanced resistance to magnetic fields.

Price

The new Longines Avigation Big Eye replica L2.816.1.93.2 comes with a smooth brown leather strap that doesn’t distract from the watch itself. It has a beautiful vintage appearance, with reinforced stitching near the lugs and a titanium buckle that matches the case. It’s understated, but it’s comfortable to wear and compliments the watch well. and is priced at EUR 3,230 or CHF 3,200.

For more information, please visit our latest replica Longines watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Replica Omega's Holiday Wishes

Replica Omega's Holiday Wishes

The winter season is here and there is an atmosphere of celebration in the window, and the moment I can look at makes my heart beat.

An exquisite watch came into view, every detail of it was full of charm, which fascinated me.

OMEGA, a famous professional watchmaking brand in Switzerland, has carefully selected Replica Omega timepieces to send you festive blessings.

I want to go to the moon

The exploration of the Omega Speedmaster moonwatch replica is endless. The glory of the Speedmaster Moonwatch is world-renowned for accompany astronauts to complete the six moon landings of mankind so far. Nowadays, the new generation of replica Omega Speedmaster moon watch 310.60.42.50.01.001 not only faithfully restores the classic details of the early Speedmaster prototype watches, but also has a new look inside and out, and is fully upgraded. The watch case is made of shining Sedna 18K gold, and the internal movement is upgraded to the 3861 Master Chronometer movement, which can be called the pioneer of watchmaking.

I want to take risks

The Omega Seamaster 300M dive watch 007 version replica 210.90.42.20.01.001 accompanied James Bond in the film "007: No Time to Die" to perform secret agent tasks. The watch case and bracelet are made of grade 2 titanium, strong and light, with a brown "tropical" dial. The retro style and the detailed design inspired by agents make this stylish watch a popular choice.

I want exquisite

The Omega De Ville red dial women watches 435.53.40.21.11.002 small seconds is a classic and elegant choice for the wrist. The watch case is made of Sedna 18K gold with a burgundy red arched dial. The exquisite small seconds dial design adds vitality to its timeless style. The outstanding precision performance of the watch is a model representative of the exquisiteness and refinement of a mechanical watch.

I want to see the sea

The Omega Seamaster Aqua Terra watch replica 220.20.34.20.59.001 has always led the fashion wave. The case and bracelet of this ladies' watch are made of stainless steel and Sedna 18K gold. The agate gray dial is embossed with a ripple pattern, just like the graceful ripples of the sea. The hour scale adopts the shape of a sailboat hull, and the date window at 6 o'clock is like a porthole. The fresh and capable design of the watch shows the charm of the ocean, which is pleasing to the eye.

I want classics

The Omega De Ville 18K red gold watch replica 424.23.40.21.08.001 is a model of Omega's pioneering watchmaking technology. The case of this watch is made of stainless steel and 18K red gold. It has a silver-white dial with a silk texture. It has a power reserve indicator at 6 o'clock and a small seconds at 9 o'clock.

I want to shine

Omega De Ville diamond ladies watch replica 428.18.36.60.13.001 has always been favored for its modern style and slim design, providing more choices for women who like retro and simple style. The watch case is made of stainless steel, with 38 brilliant diamonds of different sizes inlaid on both sides of the case, which naturally extend to the lugs, presenting a charming curve. The brown dial presents a sun-ray polishing effect. The hands are PVD treated and are made of Moonshine 18K gold. The Roman numeral hour markers are also made of Moonshine 18K gold, which complements the diamonds on both sides of the case.

In this season of celebration, we are full of joy of getting together. Omega will select your beloved gifts for you, and look forward to meeting you in the warm festive season.

You are the love in my heart!

If you are interested in Omega watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Review the Replica Panerai Luminor Marina Carbotech With Low Price

Review the Replica Panerai Luminor Marina Carbotech With Low Price

In the past few years, Panerai has been quite accomplished in the field of materials, such as direct metal laser sintering (DMLS) titanium, EcoTitanium™ environmentally friendly titanium, and the Carbotech™ carbon fiber we are going to introduce today. Panerai is constantly breaking through the limits. , So that the watch has both high performance and unique appearance. This time we got Panerai LUMINOR MARINA CARBOTECH™ Lumino 44mm watch replica PAM01661, let's take a look.

Carbotech™ carbon

Carbotech™ carbon fiber is made by adding carbon fiber sheets to high-tech polymer PEEK (polyether ether ketone) and compressed under high pressure at a specific temperature; the integrated composite material is strong and reliable, and each carbon fiber sheet is overlapped in different directions. . The irregular texture makes each carbon fiber sheet have a different texture, and each watch is unique. In addition, this special conforming material also has excellent performance, can effectively resist external impact and corrosion.

The Case & Dial

As dimensionally imposing as the 44mm case is, it actually wears very well. This is thanks in (very) large part to the remarkable lightness of Carbotech. At just 96 grams, this watch is approximately one-third of the weight of an Omega Ploprof. 

Panerai Luminor Marina watch replica combines the special material of Carbotech™ carbon fiber with Panerai’s signature pillow case, sandwich structure dial and blue coating to make the watch look dynamic. We can see that the surface of the case and bezel are covered with exquisite textures, showing a very special visual effect.

Panerai's classic crown protection bridge design is highly recognizable and can also protect the safety of the crown. The sandwich structure dial is presented in black, and the design of the dial is relatively simple, presented in a small three-pin layout. The small seconds dial is set at 9 o'clock, and the date display window is set at the 3 o'clock position. The Arabic numerals and hour markers are coated with a blue Super-LumiNova™ luminous coating, which appears blue when the light is sufficient. When the light conditions are not good, the hour markers and hands present a green luminous effect.

The Movement

Inside reference PAM01661 is the P.9010 caliber, created by Panerai in its Neuchâtel manufacture. As this century wears on, Panerai seems to be more and more concerned with slimming down its pieces. Such a task obviously begins with the movement. The P. 9010 is just 6mm thick and lends itself to more wearable timepieces. The quick-set hour hand is linked to the date mechanism for rapid adjustment. And despite the movement's slimness, there is room enough for twin barrels that kick out a very much appreciated 3 -day power reserve.

This sporty Luminor Marina watch replica is water-resistant to 300 meters. A Panerai Sportech strap is the perfect partner for this watch. It is a water-resistant rubber material that is as comfortable as it is practical.

Conclusion

With original ideas and pioneering materials, Panerai uses innovative materials to interpret the charm of the other side of the watch and create a new level of aesthetics. In the LUMINOR MARINA CARBOTECH™ Lumino replica series carbon fiber watch-44mm (watch model: PAM01661), Carbotech™ carbon fiber not only gives the watch a more stunning appearance, but also the 96 grams of the case is lightweight and excellent, which also allows consumption Visitors experience a more comfortable wearing feeling, with both aesthetics and practicality.

The Panerai Luminor Marina Carbotech replica (PAM01661) will retail for a surprisingly "attainable" €12,500. More information, please visit our latest replica Panerai watch listing, we are selling almost all model AAA grade 1 :1 cloned Panerai watches.

Bell & Ross launches the new Bell & Ross BR 05 Chrono White Hawk Chronograph Replica

Bell & Ross launches the new Bell & Ross BR 05 Chrono White Hawk Chronograph Replica

Bell & Ross has always been known for aviation watches and military watches. In 2019, the brand followed the trend of one-piece bracelets, integrating iconic case shape and classic design, and released the urban-style BR 05 luxury sports series. The series has both a large three-hand calendar watch and a GMT watch, as well as larger chronographs with more complex functions. Today, Bell & Ross has launched a new Bell & Ross BR 05 Chrono White Hawk replica watch BR05C-SI-ST.

The Case

Dubbed "White Hawk”, this new edition of the replica Bell & Ross BR 05 Chrono basically introduces a new set of colours and some specific details on the back. The rest, referring to overall design, proportions and movement, are identical to the classic black or blue editions. As such, the rounded square shape of the case, with its nice combination of vertically brushed surfaces and large polished bevels, as well as the typical screws at each corner, are present. This version is bold and large, at 42mm in width and 13.5mm in height. The case is 100m water-resistant, features sapphire crystals on both sides and shows well-integrated chronograph pushers.

The Dial

The main evolution for this replica Bell & Ross BR 05 Chrono White Hawk is the dial. Gone are the dark and highly contrasting blue or black backgrounds; here, B&R opts for something lighter and fresh, with a matte, silvery-white opaline dial. It retains the same sub-counters with a design that recalls that of the case. The applied hour markers, the hands and the counters are all executed in silver with light touches of red, giving a bit of life, on the two chronograph hands.

The Movement

Under the sapphire crystal decorated with a specific silver metallized White Hawk logo is the calibre BR-CAL.301. This movement is based on the automatic modular chronograph ETA 2894-2, yet reworked in terms of decoration. It also features a 360° rotor with an openworked design.

The Bracelet

The BR 05 Chrono White Hawk replica is worn on either an integrated stainless steel bracelet with brushed and polished links, closed by a triple folding clasp, or on a textured black rubber strap closed by a classic folding buckle.

Price

Production of the replica Bell & Ross BR 05 Chrono White Hawk is limited to 250 pieces (disregarding the strap option) and priced at EUR 5,600 on a rubber strap or EUR 6,100 on a steel bracelet. It can be pre-ordered now from the brand’s website, with deliveries in mid-December 2021.

For more information, please visit our latest replica Bell & Ross watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Technical Specifications

Reference: BR05C-SI-ST

Case: 42mm width x 13.5mm height - stainless steel bracelet, brushed and polished - squared bezel with rounded edges and polished screws - sapphire crystal front and caseback - crown guards and screw-down crown - 100m water-resistant

Dial: silvery-white opaline dial - applied hour markers and hands filled with Super-LumiNova - red accents on the chronograph hands - squared chronograph counters

Movement: calibre BR-CAL.301, base ETA 2894-2 - automatic modular chronograph - 28mm - 37 jewels - 28,800 vibrations/hour - 42h power reserve - hours, minutes, small seconds, date, chronograph with 30-minute counter

Bracelet: integrated brushed and polished bracelet, with triple folding clasp with push-buttons - also available on a black textured rubber strap with folding clasp

Review the New A. Lange & Söhne Zeitwerk Honeygold Lumen 41.9mm Replica

Review the New A. Lange & Söhne Zeitwerk Honeygold Lumen 41.9mm Replica

The A. Lange & Söhne Lumen replica series was born in 2010 in Zeitwerk Luminous (not yet named Lumen) and has now developed into one of the most popular and most popular watches in the brand's product portfolio. These watches with sapphire dials are rare and unique, making them the best choice for collectors. They will be pleased to know that today a new A. Lange & Söhne Zeitwerk Honeygold Lumen 41.9mm replica has been launched. It is back to its roots, based on an architectural watch with a jumping indicator. It has many new features, first of all an unprecedented movement, which has powerful power. Moreover, it is also the first Lumen not made of platinum.

The Lumen Series

Behind the A. Lange & Söhne Luminous/Lumen replica collection, there’s a rather fun story. Anthony de Haas, Director of Product Development of the brand, while wearing an early version of the platinum Zeitwerk found that reading the time in the dark was rather difficult. So his team and he started to explore how to give this modern-looking watch better night-time legibility… And once the discs were given luminous numerals came the idea to actually show them (and some of the movement’s technicality) by adding a partially-tinted sapphire dial that, however, was rather special since it let UV pass through in order to charge the luminescence of the numerals. And this is how the Luminous/Lumen series started.

The Case

The diameter of the A. Lange & Söhne Zeitwerk Honeygold Lumen repilca is still 41.9mm and the height is still 12.6mm, just like the previous editions of the time-only Zeitwerk watches. But, due to the new movement and a revised display – more on that later – the case has different proportions. First, the bezel is now slightly thinner than before, making the watch visually a bit less bulky. And because A. Lange & Söhne is all about respecting some ancient rules of proportions, the lugs have also been revised to be sleeker. We’re talking minor adjustments here, of course, but some that could give the Zeitwerk Honeygold Lumen a bit more elegance than before on the wrist.

One of the main novelties with this edition is the material used for the case. Previous Luminous/Lumen replica editions have always been crafted in platinum, but this new model is housed in a case made of the brand’s proprietary Honeygold, a special 18k alloy with “various admixtures and a special thermal treatment” giving the gold more hardness and a very subtle colour. Only reserved to limited-edition watches at Lange – like the 175th-anniversary models – this rare and hard-to-machine alloy find its way for the first time in the Lumen series, but not in the Zeitwerk collection, as used previously in the 2017 Zeitwerk Decimal Strike. The case retains the same finishing as before, with a polished bezel and lugs, and straight-brushed flanks. It is worn on a brown alligator strap to give a final warm touch, something that has been absent of the previous Lumen watches, all with a black-on-grey and technical look… This Zeitwerk Honeygold Lumen, in this respect, feels rather surprising.

An important new element of this new Lumen watch replica is the presence of a pusher on the side of the case, which was absent from previous time-only Zeitwerk. This is where the influence of the Zeitwerk Date shows the most, as indeed the movement of this new version is based on the date model presented in 2019. It allows the hour indication to be switched separately, which in turn makes it simpler to set the time. The minutes are, of course, still adjusted by the crown. Like in the Zeitwerk Date, the switching impulse is generated when the pusher is released. “The advantage is that switching is always uniformly executed, regardless of how gently or vigorously the pusher is actuated,” explains A. Lange & Söhne. And from the words of Anthony de Haas, this system is also more compact than a classic pusher (think chronograph-like pusher) and this made it possible to retain the same dimensions as before.

The dial

Being part of the series of Luminous watches, this Zeitwerk Honeygold Lumen replica is, of course, fitted with a partially-tinted sapphire dial. New for this watch, it’s not glued anymore but set in place between two O-ring gaskets, which make assembly easier and also provide more resistance in case of shocks. The sapphire dial comes with a light-permeable coating that allows the luminous numerals that are not exposed in the aperture (those normally hidden under the dial) to absorb enough UV light glow in the dark. So not only the numerals exposed in the apertures are luminous, but the hidden numerals are slightly visible under the sapphire dial too…

The display is still composed of a time bridge with two massive openings revealing a single disc for the hours and a combination of two discs for the minutes. Redesigned for the occasion, the bridge houses a larger sub-seconds dial and it is now executed in black rhodiumed German silver (instead of being black coated), giving it a slightly lighter and warmer tone. The power reserve indicator is still positioned at 12 o’clock and both hands on the dial are done in 18k Honeygold.

The replica Zeitwerk Honeygold Lumen retains the stunning display that has made the series distinctive, meaning a complex combination of three instantaneously jumping discs, giving the time in a digital format, and all numerals are identical in size. They switch precisely and read from left to right. Behind this mechanism is a complex constant-force device.

The Movement

What is new is the calibre L043.9, a movement that is based on the architecture of the calibre found in the Zeitwerk Date. Combined with a lighter balance wheel and, consequently a lighter remontoire, this results in a power reserve that has been doubled, moving from 36 hours in the past to now 72 hours. It’s also rather certain that this upgraded movement will find its way into the case of the regular Zeitwerk sooner or later.

This longer power reserve, combined with the new hour-correction pusher, makes this calibre L043.9 a fairly impressive improvement over the previous generation. Composed of 462 components, the movement runs at 18,000 vibrations/hour (2.5Hz). 

Price

The A. Lange & Söhne Zeitwerk Honeygold Lumen replica (ref. 142.055) is a limited edition of 200 pieces. It will be priced at EUR 114,000. More information, please visit our latest replica A. Lange & Söhne watch listing, we are selling almost all model AAA grade 1 :1 cloned A. Lange & Söhne watches.

What watches the tough guy Donnie Yen wears?

What watches the tough guy Donnie Yen wears?

Donnie Yen once wore a Hublot BIG BANG replica series blue disc watch, the whole from the dial to the strap is dark blue. Generally speaking, such an overall large-area color block watch is difficult to match our daily wear, but Yen Zidan's outfit adds some highlights to the overall plain match. Let's take a look at this Hublot Big Bang Meca-10 Blue Ceramic replica 414.EX.5123.RX.

Details

For what its worth, Hublot makes an attempt to share the fact that this is a watch with a movement designed to be original, and cool looking when writing: "The mechanics of the Big Bang Meca-10 Blue Ceramic replica are as innovative as the materials comprising them. Developed over a span of two years, its manually-wound skeleton calibre, with a 10-day power reserve, contains 223 parts. A testament to beauty and technical expertise, it has two barrels parallel to the power reserve indicator: a cogwheel system with two rakes sliding along a horizontal axis. Accentuating this mechanical architecture, an opening at 3 o'clock unveils a red dot when the movement is nearing the final days of its power reserve, while a gearwheel at 6 o'clock indicates the exact number of days remaining and the regulating organ, coupled with the small second regulator, appears at 7 o'clock.”

Operating at 3Hz (21,600 bph), the HUB1201 has a full 10 days of power reserve with a cool indicator on the dial. The manually-would movement indicates just the time with a subsidiary seconds dial at 9 o’clock. The movement does double duty as the engine inside of the watch as well as the dial presentation for wearers (and their audience). Legibility is remarkably cool via the use of large hands and hour markers, as well as effective surfacing treatments on those elements.

At 45mm wide and 15.95mm thick (water-resistant to 100m), the Meca-10 replica exists in the standard modern generation Big Bang case. Hublot currently offers the Big Bang Meca-10 replica in a range of styles including black ceramic, titanium, magic gold, king gold, and now blue ceramic as the reference 414.EX.5123.RX replica. Blue continues to be a hot seller in the luxury watch space, so expect to see a lot more of this hue from Hublot and pretty much all other watch brands for the next few years. Blue ceramic is still a relatively uncommon color for ceramic watches, so there is a distinct novelty value in a watch like this right now.

Summary

On the wrist the statement this watch makes to me is quite simple and straightforward. This is for watch collectors fond of modern, masculine designs, as well as for people who appreciate the art of mechanical movements rendered to be visually engaging and assertive. This Hublot Big Bang Meca-10 Blue Ceramic 414.EX.5123.RX replica has a retail price of $22,000 USD.

More information, please visit our latest replica Hublot watch listing, we are selling almost all model AAA grade 1 :1 cloned Hublot watches.

Review the Omega Seamaster 300M 007 "No Time to Die" Watch Replica

Review the Omega Seamaster 300M 007 "No Time to Die" Watch Replica

The latest James Bond 007 movie was originally scheduled to be released in 2019, but it was postponed due to the epidemic. Now, in the fall of 2021, James Bond's latest story "No Time to Die" is finally released. This is another extraordinary film in a long-term series. After watching watches and movies for a period of time, I will express my opinion on the latest generation of Omega Seamaster 300M 007 "No Time to Die" watch replica 210.90.42.20.01.001.

The Story

Since the early 1990s, Omega watches have been an official part of the James Bond 007 franchise, through nine 007 movies. "No Time to Die" is particularly touching for everyone involved, because this is the last 007 movie in which actor Daniel Craig plays 007 James Bond. This Omega Seamaster 300M 007 watch replica 210.90.42.20.01.001 is not just another limited edition 007 Omega watch, but the exact product that Daniel Craig wore when he played James Bond in the movie. This is not the first time Omega has produced a commercial watch worn by Mr. Craig in a movie, but this is obviously the first time Daniel Craig has passed through him. I really participated in the creative direction. Therefore, in addition to the latest James Bond 007 watch replica, its design has also received very specific feedback and guidance from Craig. For this reason, I personally call the Haima 300M No Time To Die product "Daniel Craig Edition".

The Case

While hoping that the No Time To Die watch replica looks smooth, Craig is very interested in increasing the wear resistance of the watch. Considering all the action scenes, he is right, James Bond needs something lightweight and highly secure. Another main feature of the watch is its lightness. The 42mm case is made of secondary titanium, the brown bezel and dial are made of aluminum, and the watch looks thinner by changing the bezel and sapphire crystal to a more retro dome. Both straps are made of secondary titanium mesh chain and embellishment. The military NATO straps with dark brown, gray and apricot stripes are all made of lightweight materials. You can imagine how light this 007 version is.

The Dial

Although not everyone likes the "fauxtina" lume (coloring the lume to make it look aged), I happen to like the more brown/tan lume instead of white or green. The dial and bezel are made of natural gray titanium, tan luminous body and slightly brown matte black, creating a very retro style, but very fashionable. The color came out too.

The 6 o'clock position of the dial is decorated with a broad arrow logo, which can be seen in many antique British military watches, which naturally adds the finishing touch to this work. This sign dates back to the 17th century and is used specifically to mark it as government property, and is also commonly found on military equipment. As we all know, 007 is a special agent of MI6, so it is reasonable to have this logo printed on his watch.

The Bezel

The Omega Seamaster 300M replica is a diver-style sports watch with a water resistance of 300 meters. The case is equipped with a unique manual helium valve at 10 o'clock. For this model, Omega removed the ceramic bezel insert and actually replaced it with an older aluminum bezel insert. In other words, Omega doesn't just want to go backwards in technology. Omega explained that they use a special crystal coating process as part of or after the anodizing process to color aluminum. In fact, this does not make the aluminum bezel as resistant to scratches as ceramic or sapphire, but it is a significant improvement compared to the basic scratch resistance of anodized aluminum.

The Movement

The retro exterior of Omega Seamaster Diver 300M 007 Edition replica hides modern technology. It has a built-in 8806 Co-Axial Master Chronometer automatic winding movement. It has passed METAS certification. It has passed rigorous tests for timekeeping accuracy, antimagnetic, waterproof, and even power reserve.

Price

Omega offers two versions of the Seamaster 300M No Time To Die Edition, the difference is whether they are equipped with a NATO style strap (inspired by Sean Connery's James Bond strap) or matching titanium Milanese (mesh metal) bracelet. Their product reference numbers are the same, both are 210.90.42.20.01.001, are priced at $8,100 USD, and the titanium Milanese bracelet is priced at $9,200 USD.

Looking for an Omega watch replica, click here. We are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Review the Rolex Submariner 41mm black watch replica with low price

Review the Rolex Submariner 41mm black watch replica with low price

Last year, Rolex introduced the Rolex Submariner 41mm black watch replica 124060 - a 41 mm watch with an improved case shape, thinner lugs, a slightly different bracelet construction and a new interior, while making the biggest and most inconspicuous change move to the Sub.

The Case

The Rolex Submariner black watch replica 124060 looks damn near identical to its predecessor. In fact, the changes to the case actually make the watch appear slimmer. The old maxi case (so named for its boxy, squared-off profile) is gone. Instead, the 41mm size coupled with a 21mm lug width creates a case profile that looks far more like the Submariners of old than the 114060.

But let's get pedantic! On paper, the new Submariner replica reads as 41mm in diameter, but when we measured it ourselves, it came out somewhere between 40.6 and 40.8 depending on where you catch the case with the calipers. This 41mm designation is more a product of rounding up than a meaningful representation of the case diameter.

The lugs have been slimmed down as a result of the slight increase in case size. Other than the size, the case looks like it always has. We have the same 904L steel holding it all together, the solid caseback, the crown guards, the signed crown, and the combination of both brushed and polished surfaces.

The Bezel and Dial

The overall styling of the new Rolex Submariner replica is (noticing a pattern here?) the same. That satisfyingly clicky uni-directional bezel still features the black ceramic insert and luminous pearl. Each of the numerals on the bezel is recessed and platinum filled for both durability and legibility. I'm sure there are a few people out there who would like to have seen a lumed bezel – but again, this is a Submariner. Changes are incremental, so let's not get carried away.

In recent years, the indicator of choice has been a small coronet between the words Swiss and Made. In previous iterations of the Submariner, the Swiss Made moniker was separated by a small hash mark. Other than that, changes are minuscule if not totally non-existent (especially on wrist). The dial is the same deep gloss black with maxi (read, large) markers in stark white with white-gold surrounds. To put it simply, this is the dial you expect to see on a Submariner.

The Movement

Internally is where the watch has its biggest improvement, thanks to the new Rolex in-house caliber 3230 movement – effectively the no-date version of the existing 3235. It features two patented Rolex creations: The Parachrom Blue balance spring and the Chronergy Escapement, working in tandem to ensure improved accuracy and performance.

Rolex introduced the in-house caliber 3235 in 2015, but took until 2020 to unveil the 3230 and insert it in both the new replica Rolex Submariner (no-date) as well as the 36 and 41mm Oyster Perpetual models. Taking into account the quality of the movement itself, as well as the brand's stringent chronometer certification standards, the new Submariner notches +2/-2 seconds per day accuracy as well as 70 hours of power reserve.

The Bracelet

If there's one thing that has remained a visual staple for steel replica Rolex sport watches, it's the oyster bracelet. Its all-brushed, toolish nature is every bit as iconic as the watches it's held secure to our wrists.

Much like the entire watch, the new Submariner bracelet is both the same and different. At a quick glance, this is the same bracelet as on prior models. In reality, however – with the 21mm lug width – it's now wider than on previous Subs. The increased width at the top of the bracelet results in a less drastic taper down to the clasp.

Even though the clasp is unchanged, it's not outdated. In fact, it's still one of the best systems available. For one, it features the signature flip-lock enclosure ensuring stability. But the best part is surely the Glidelock extension system allowing for on-the-fly adjustments. Under the clasp, you pull on the bracelet to unlatch it. A series of notches allow you to slide the bracelet forward and backward in increments of 2mm.

Details

The Rolex Submariner replica ref. 124060. Stainless steel case with black dial and black Cerachrom bezel. Water resistance to 300 meters. Rolex manufacture cal. 3230 with Chronergy escapement and 70 hours of power reserve vibrating at 28,800 vph in 31 jewels. Stainless steel Oyster bracelet with Glidelock clasp. Price: $8,100.

For more information, please visit our latest replica Rolex watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Introduction of A. Lange & Söhne Langematik Perpetual Calendar Blue Dial Watch Replica

Introduction of A. Lange & Söhne Langematik Perpetual Calendar Blue Dial Watch Replica

On the occasion of the 20th anniversary of the original A. Lange & Söhne Langematik Perpetual Calendar replica, A. Lange & Söhne will release two new limited editions A. Lange & Söhne Langematik Perpetual blue dial replica watches — models 310.028 and 310.037 each with 18k White gold or 18k pink gold case.

The Case & Dial

The 2021 editions of the replica A. Lange & Söhne Langematik Perpetual, both limited to 50 pieces, use either 18k white gold or 18k rose gold for their elegantly modest 38.5 mm cases. Both models are distinguished by their rich blue dials, made of solid silver with an embossed, grooved structure underlying the applied Roman hour numerals, made of rhodiumed white gold or rose gold to match the case. The hands, the buckle, and the lunar disk on the ultra-precise moon-phase display are also made of case-matching precious metal. The blue dial is crafted from solid silver.

In classic Lange style, the dial has been thoughtfully designed to render its complex combination of displays as legible and intuitive as possible. The outsize date appears prominently at the top; the subdial on the left indicates the day of the week, along with a 24-hour day-night scale; the one on the right hosts the month and overlaps a smaller subdial with the leap-year cycle; and a combined moon-phase aperture and small seconds subdial rests at the 6 o’clock position. Lange’s moon-phase indication is an ultra-precise “long term” one, requiring a correction only every 122.6 years, and the calendar’s date, assuming the movement is perpetually wound, will not need manual correction until the year 2100. If such a correction is necessary at any point, however, a recessed push-button at 10 o’clock makes it easier, advancing all of the calendar elements collectively. Each one can also be set separately in case of shorter-term periods of rest for the watch.

Lange’s outsize date is prominently displayed at 12 o’clock. The month and leap-year indication appear in intersecting subdials.

The Movement

The new A. Lange & Söhne Langematik Perpetual replica models use the same calibre (the L922.1, based on the Sax-O-Mat movement) that powered the first 2001 model. Lange’s patented zero-reset mechanism means that when the crown is pulled, the movement stops, and the seconds hand jumps to zero. This allows the minute hand to be precisely aligned with the respective minute marker, and the watch can be simply and accurately synchronised. With its diameter of 30.4mm and thin height of 5.7mm, the in-house movement is distinguished by its bidirectional winding three-quarter rotor to generate the 46-hour power reserve. The benefit of having a small rotor, crafted in 21k yellow gold with a platinum ring to add centrifugal mass, means that it doesn’t obscure the view of the balance and the beautifully hand-engraved balance cock.

Like all Lange’s movements, the finishings are spectacular: the rotor is decorated with brushed and frosted surfaces; the three-quarter plate and bridges are decorated with Glashütte ribbing, the bevels are polished, and the scenery is enlivened with a touch of colour from the blued screws and gold chatons bearing the rubies.

Price

Few companies make perpetual calendars as well and as easily as Lange. the replica A. Lange & Söhne Langematik Perpetual is designed to be elegant and luxurious, but also suitable for everyday wear (if you wish). Both the white gold (Ref. 310.028) and pink gold (Ref. 310.037) Langematik Perpetual models come with a dark blue hand-stitched leather strap and a prong buckle in gold to match the case. Each is limited to 50 pieces and will retail for EUR 91,000 (incl. taxes).

For more information, please visit our latest replica A. Lange & Söhne watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Bell & Ross BR V2-94 Full Lum 41mm Green Dial Watch Replica is launched

Bell & Ross BR V2-94 Full Lum 41mm Green Dial Watch Replica is launched

Bell & Ross released its latest luminous experiment. Using the relatively familiar case design and configuration (through the Vintage series chronograph style in the basic BR V2-94 design), the new Bell & Ross BR V2-94 Full Lum 41mm green dial watch replica still presents a novel appearance with its contrasting super luminous.

Luminous Characteristics

Soon after its discovery in 1898, radium found its way on the dial of a watch. In 1903, a certain George F. Kunz painted the hands of his watch with this newly-discovered material, using the radioluminescence properties to read the time in the dark – he even patented this. From the earliest days of the wristwatch to the 1960s, most watches with luminous hands and markers will be executed with radium paint, which will be banned in 1963 due to the dangerousness of this material – look at “Radium Girls” to have an idea. It will be replaced by tritium, another radioactive material with a much shorter half-life (12 years for tritium, 1,600 years for radium), lower emissions but also less durable in terms of luminescence.

By the mid-1990s, these materials will be banned from watchmaking and the replacement came in 1994 with the patented LumiNova – a stable, non-toxic paint that is now used mostly under the name Super-LumiNova, an upgrade of the original material. On the contrary to radioactive materials, SLN doesn’t naturally shine but needs to be “charged” to emit light in dark conditions. However, it is virtually inexhaustible. The pigments can also be mixed with endless colours, at the price of lower light emissions.

The 41 MM Case

As all other replica chronographs with the BR V2-94 nomenclature, this Bell & Ross BR V2-94 fully luminous edition replica is housed in a 41mm case, with rounded shapes and an overall classic, sporty-chic design. Following the facelift of this collection in 2017, the design was made slightly more elegant, with downsized proportions, softer edges and an overall more retro style. The case shows satin-brushed and polished surfaces, and is here equipped with a fixed black anodized aluminium bezel, with a 60-minute scale – which brings a pleasant contrast with the bright dial.

Over the dial and protecting the watch is an ultra-domed sapphire, adding some charm and warmth to this watch. This B&R replica is equipped with a screw-down crown, a screwed caseback and screw-down pushers (not something we really like here at MONOCHROME). Still, the watch offers a comfortable 100m water-resistance. We’ve measured the case at 14.2mm in height and 47.6mm lug-to-lug. Not small but compact enough for a watch of this diameter. On the wrist, it feels comfortable and well-executed, a feeling reinforced by a surprisingly solid case.

The Green Dial

In daylight conditions, the dial of Bell & Ross BR V2-94 replica is quite surprising, as it shows colours that are not familiar at first sight. The surface is matte and has different hues to display, all in the pale yellow and pale green range. The base of the dial has a pale green colour – a very subtle tone, which appears almost off-white in most conditions. The date, at 4:30, has a matching colour and “blends” into the dial.

For the rest, all the indications are made from Super-LumiNova and are left without additional pigments, to have the best possible efficiency. As such, the colours are all in the pale green or pale yellow range. In order to increase contrast and to optimal legibility in daytime conditions, all the elements – applique numerals, hands, tracks and sub-counters – are outlined in black.

The real draw of any fully lumed dial is going to be the effect you get in a dark room, and based on the supplied images from Bell & Ross, the V2-94 delivers. Most of the dial lights up in a bright fluorescent green, but the 9:00 sundial glows blue. It’s an undeniably cool effect, and if you don’t already have a good UV flashlight for lighting up your watches while you’re toiling away at your desk throughout the workday (I know I’m not the only one), the lume treatment here absolutely necessitates one. 

The Caliber BR-CAL.301

As for its movement, Bell & Ross replica stuck with the standard BR-CAL.301 they have used to great effect in the series (the caliber is based upon the ETA 2894-2 and provides 42-hours of power reserve). Like the mechanism used in the previously released GMT, this automatic chronograph caliber helps provide easily serviceable, no-nonsense mechanical power to the watch, helping keep the focus on the functionality of the highly luminous wearer.

The Basics

Brand: Bell & Ross

Model: BR V2-94 Full Lum Replica

Diameter: 41mm

Thickness: 13.55mm

Case Material: Steel

Dial Color: Luminescent green

Indexes: Luminous at all 12 positions, Arabic at six and 12 o'clock

Lume: Come on.

Water Resistance: 100 meters

Strap/Bracelet: Black rubber

Caliber: ETA 2894-2 / BR-CAL.301

Functions: Hours, minutes, seconds, date, chronograph seconds, chronograph to 30-minutes

Power Reserve: 42 hours

Winding: Automatic

Frequency: 28,800 vph

Price: $5,100

For more information, please visit our latest replica Bell & Ross watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Review Omega Seamaster Diver 300M Co-Axial Master Chronometer Nekton Watch Replica

Review Omega Seamaster Diver 300M Co-Axial Master Chronometer Nekton Watch Replica

Last year, Omega and Nekton, a non-profit research foundation headquartered in the United Kingdom, launched a new diving watch, continuing to work to protect our oceans and the Indian Ocean. The new model Omega Seamaster Diver 300M Co-Axial Master Chronometer Nekton watch replica 210.32.42.20.01.002 uses a polished and brushed stainless steel case, equipped with a grade 5 titanium unidirectional rotating diving bezel.

Black Wave Dial

The dial carries over the now-iconic wave motif in a laser-ablated black ceramic (hence the ZrO2 noted on the dial) that is matte finished. The closed caseback features an embossed Nekton submarine medallion with the Seamaster 2 name illustrated on the side. The unidirectional rotating divers’ bezel comes in grade 5 titanium, replacing the LiquidMetal typically found on Omega’s Seamaster 300 models. Its laser-ablated 60-minute diving scale sports silver-colored Arabic numerals in positive relief, along with the traditional triangle-shaped marker at 12 o’clock.

Steel and Titanium

The case of this new Seamaster Diver 300M Nekton replica is made of steel, but it uses titanium for its bezel. Why? I asked and Omega replied that it has to do with the manufacturing process. Using laser ablation for the finish of the bezel will affect the structure of the stainless steel, resulting in discoloring. Also, by changing the structure of the material, it becomes prone to corrosion. By using (grade 5) titanium, there are no issues with discoloring and corrosion. Creating the entire watch of titanium was not according to the plan. It would have a negative effect on the price tag and the 300M Bond edition is already in titanium.

Bracelet and Rubber Strap

There’s little wrong with the 9-row bracelet for this Omega Seamaster Diver 300M replica. But yet, I prefer it on the rubber strap. The rubber strap gives a sportier look and a nice contrast with the steel (and titanium). I feel that this watch on the bracelet is a bit too metallic, for my taste. However, if I am to purchase this new Seamaster Diver 300M Nekton edition, I think I will buy it on a bracelet and add the rubber strap separately. Based on experience, I know it is often more expensive to buy a steel bracelet than to add a separate strap. Just in case I change my mind in the future. When you’re very confident you never want to wear it on the bracelet, it will save you a few hundred for sure.

Caliber 8806 Movement

The replica watch’s caseback features an engraved embossed Nekton submarine medallion, “NAIAD LOCK, DIVER 300 M,” lettering, and the watch’s water-resistance, as a tribute to the partnership.

Beating inside the 42-mm-diameter case is Omega’s Co-Axial Master Chronometer Caliber 8806. The self-winding movement features a free sprung-balance with a silicon balance spring, holds a power reserve of 55 hours, and meets both the COSC chronometer certification standards as well as the METAS standards of magnetic resistance to 15,000 gauss. The movement’s rhodium-plated rotor and bridges feature Geneva waves in arabesque, a familiar decorative finish for Omega calibers.

Helium Valve

The grade 5 titanium bezel goes perfectly with the stainless steel case, there is no noticeable difference in color. Whereas grade 2 titanium, would be much darker. The finish on the case is beautiful, brushed sides and polished facets on the lugs and crown guard. At 10 o’clock, you will find this model’s famous helium valve.

Some people truly dislike the extra crown, but I think it looks cool, even though I will (most probably) never use it. Since it has been used on the Seamaster 300M replica since 1993, I’ve become accustomed to it. I  guess it would seem awkward to me now, were there no helium valve at 10 o’clock. Anyway, if you don’t like it, you either need to deal with it or pass on this watch. There’s no other way.

Price

The new Seamaster replica is available in two models, one with an integrated black rubber strap with a polished-and-brushed buckle (pictured above right), or a stainless steel bracelet (pictured above left.) The watch (Ref. 210.32.42.20.01.002 replica) retails for $8,850 and is available in October. 

For more information, please visit our latest replica Omega watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Specifications

Model: Omega Seamaster Diver 300M Co-Axial Master Chronometer Nekton Edition Replica

Reference Number: 210.32.42.20.01.002

Movement: Omega Co-Axial Master Chronometer Caliber 8806, automatic-winding, co-axial escapement, free-sprung balance, silicon balance spring, resistant to magnetic fields of 15,000 gauss, rhodium-plated rotor and bridges, 55 hour power-reserve

Functions: Hours, minutes, seconds

Case: Stainless steel, grade 5 titanium bezel and screw-in crown with helium escape valve, water-resistant to 300 meters (1,000 feet)

Strap & Clasp: Stainless steel bracelet or black rubber strap

Dimensions: Diameter = 42 mm, Lugs = 20 mm

Introducing of the New Cartier Tank Must Steel Watch Replica collection

Introducing of the New Cartier Tank Must Steel Watch Replica collection

Taking advantage of Tank's enduring popularity, Cartier (re)launched Tank Must de Cartier on Watches & Wonders 2021. The new Tank Must series includes a variety of entry-level steel watches, including an extraordinary solar watch, and three Cartier Tank Must Steel watch replica with solid dials in red, green and blue, inspired by the 1970s Original watch.

History

The Must family in the Cartier catalogue traces its roots back to 1972, with the first Must de Cartier watches replica launching in 1977. The collection was aimed at reviving a very different version of Cartier brand than we know today, which had undergone a number of restructures and acquisitions after Pierre Cartier, the last of the three Cartier brothers who had built the organisation into an international household name, passed away in 1964. It was aimed at rebuilding the brand with a new collection of more affordably priced products that could reach a larger client base, a strategy that proved very successful.

The Must de Cartier collection replica of the ’70s offered everything from bags and scarves, to perfumes and cigarette lighters (there was even a Lincoln Continental Mk IV “Cartier Edition”), with their range of quartz Tank watches standing out from the crowd by being cased in a gold-plated silver known as Vermeil. These Must de Cartier Tanks replica were produced in a huge number of different dial designs, with bright colours and Art Deco flourishes (the latter of which has also been revived this year in the new Tank Louis Cartier collection) and continued to be made into the late 1990s.

It’s this history that makes the new replica Cartier Tank Must collection so intriguing as an offering to both Cartier collections and those who are new to the brand.

The Case

While the new Tank Must replica line encompasses three case sizes, small, large, and extra-large, only the large model can be had with the  monochrome-colour dials that have nothing except the Cartier name and a tiny “Swiss made” at six. The rich dial colours of the Tank Must draw inspiration from a similar Les Must de Cartier model of the 1970s, though the vintage original was only available in burgundy or blue.

The proportions are classic Cartier, which is a challenge when designing new watches for a range of different wrist sizes. The case is mirror polished and has the same case screws that trace their origins back more than a century. Like almost all Cartier Tanks replica, the caseback is closed, secured with more screws and offers ample space for a small engraving if you were so inclined.

As you might expect from a Cartier Tank, the iconic crown is present in these models, complete with a blue synthetic spinel cabochon.

The Dial

The real deal in the Cartier Tank Must replica collection are the dials, which are a nod to the colourful dials of the original Must de Cartier watches of the 70s and 80s. The Roman numeral dials on replica Cartier Tanks are so ubiquitous with the design, that there is definitely something refreshing about seeing a Tank with a totally blank dial apart from the crisply printed logo.

The steel sword hands cut a contrasting figure across the expanse of block primary colour, making it still very easy to read the time despite the lack of hour markers. There is a breathtaking simplicity to this new collection that is hard to articulate the appeal of, but it speaks to the core of what has made Cartier so successful since it was founded in 1847 – elegance through design.

The Movement

All three references are powered by High Autonomy Quartz movements (with 8 years before needing a battery change), just like the first Santos-Dumont pieces that were revived in 2019, which is a good thing. Hear me out. By equipping the Tank Must collection with quartz movements, Cartier replica is able to keep the price significantly more affordable than if the same watch was mechanically powered. This means not only is there a new entry point to the brand, but the new entry point is also one that looks great and carries the Cartier design philosophy forward. Also, most peoples gripe with quartz movements is the ticking of the seconds hand across the dial, which is a reasonable issue. No seconds hand however, no gripe.

Conclusion

In general, these watches fulfilled their purpose-to make Cartier's timepieces more interesting. I appreciate that they use the iconic Tank to achieve this process. The Cartier Tank Must is AUD$4150.

As the latest model, we are designing, if you are interested in Cartier watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as A. Lange & Söhne, Patek Phillippe, Panerai, Hublot, IWC, Tag Heuer and more.

Introducing the Audemars Piguet Royal Oak 34mm Black Ceramic Watch Replica

Introducing the Audemars Piguet Royal Oak 34mm Black Ceramic Watch Replica

In early July, Audemars Piguet launched its first Royal Oak 34mm self-winding watch replica specially designed for slender wrists, including black ceramic models and frosted gold blue disc models. Among them, the new black ceramic watch model is decorated with rose gold details, showing a two-tone contrast. Today, let’s analyze this new Audemars Piguet Royal Oak 34mm Black Ceramic watch replica 77350CE.OO.1266CE.01 in detail and see how Audemars Piguet interprets the new work combining black ceramic and the classic Royal Oak.

The Case

This black ceramic version of the Audemars Piguet Royal Oak replica case has a diameter of 34 mm. It can be said that it is not limited to the limitations of "men's watch" or "women's watch", but is specially developed for wearers with slender wrists. The beauty of black ceramics comes from the intricacy and complexity of technology. Ceramic watch models need to go through a special production and manual finishing process. When creating a 34 mm diameter Royal Oak series automatic watch, the specific composition and production process of this sturdy material need to be specially designed according to the small size of the watch, while continuing the replica Royal Oak series’s consistent size ratio, aesthetic standards and Superb retouching.

Zirconium Oxide —ZrO2— powder, mixed with dedicated binder content is transformed into ceramics through a complex industrial flow requiring different stages of high-precision machining. The exact composition of ceramics remains the secret of its manufacturers. Pigments of colors are added to the powder before the manufacturing process, making it an integral part of the material. The components achieve their final color only once they have been sintered —the process of coalescing a powdered material into a solid or porous mass by means of heating without liquefaction— at more than 1400 degrees Celsius. Reaching a homogeneous colour across all components represents an additional challenge as pigments are extremely sensitive to temperature variations.

Each ceramic component is pre-polished and pre-satin-brushed, before being finished by hand with the Manufacture's trademarked alternation of satin-brushing and polished chamfers. This light, yet ultra-resistant and scratchproof material protects the movement like an armor, while the detailed hand finishing embellishes the case and bracelet with an ever-changing play of light.

The depth and intensity of black ceramics is illuminated by scintillating pink gold accents. Eight hexagonal screws, exceptionally crafted in 18-carat pink gold, secure the bezel to the case, while bringing a subtle touch of colour. Each has been meticulously finished by hand .

There’s yet another small detail. The screws on the bezel are, unusually, made of 18k pink gold and not 18k white gold, like most Royal Oak models.

The Dial

To continue with the full-black scheme, the Grande Tapisserie dial is here in black, with pink gold applied markers, logo and hands, to match the screws on the bezel. The date wheel is also executed in black.

The dial's guilloché design —one of the Royal Oak's trademarks— is achieved following an in-house know-how no longer taught in horology school. Little squares are carved out on the dial's thin metal plate by an engraving machine dating back to the 1970s that reproduces the motif of a pattern. Small diamond shapes are simultaneously cut out in the thin grooves separating the squares in a seamless weave that creates a tapestry appearance. This process requires utmost dexterity and precision.

The Movement

This Audemars Piguet Royal Oak Black Ceramic replica 77350CE.OO.1266CE.01 is equipped with Calibre 5800 self-winding movement, has a 50-hour power reserve, and is water-resistant to 50 meters. Through the sapphire crystal glass titanium metal back cover, you can appreciate part of the internal operation of the movement and the specially designed rose gold oscillating weight. Adhering to the exquisite watchmaking tradition, the movement has been carefully assembled and finished with different techniques, including Geneva pattern, pearl polka dot pattern, and satin drawing and radial pattern polishing.

For more information, please visit our latest replica Audemars Piguet watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Panerai, Hublot, IWC, Tag Heuer and more.