Anthony Davis and Audemars Piguet Royal Oak Chronograph Frosted Gold Purple Watch Replica

Anthony Davis and Audemars Piguet Royal Oak Chronograph Frosted Gold Purple Watch Replica

The new NBA season has kicked off on Christmas Eve eve December 23rd. Throughout the off-season of this particular season, deals are constantly made and news of contract renewals are also constant, among which the most fans a good wait is, the defending champion team Los Angeles Lakers' thick brow Anthony Davis, from the news released in November to jump out of the contract and then to the official announcement of the contract renewal, a total of nineteen days for many fans to wait. Today to introduce you to this champion's choice of watch, this Audemars Piguet Royal Oak Frosted Gold Selfwinding Chronograph watch replica 26331BC.GG.1224BC.01 launched at the SIHH Geneva Watch Fair 2019 is the collection of the Thick Brow, the watch uses Audemars Piguet's exclusive frosty gold process to make the watch.

This ancient technique, also known as whacking, originates from a 17-year collaboration with Florentine jewelry designer Carolina Bucci. Before being assembled, the frost gold case is struck with a tool with a diamond at the top, creating extremely fine notches in the surface that allow it to take on a diamond-like sparkle. The frosted gold work, combined with the special purple dial of the watch, makes for an overall subtle visual effect. The watch is available in a limited edition of 200 pieces.

The Case

Almost the entire surface of this Audemars Piguet Royal Oak Chronograph replica and integrated bracelet are covered in frosted gold, save for the polished flanks of the bezel, the sides of the bracelet and the chronograph pushers and crown. Admittedly, the frosty surface emits a dull, matte sparkle (is that possible?) without the dazzle of diamonds. However, on this particular model, the slightly gritty grey surface suggests concrete, very in tune with the original industrial aesthetics of the 1972 model.

Although it grew in size to 41mm during its 2012 makeover, the balance between the diameter and thickness (11mm) is perfect – in fact, it looks sleeker than the 39mm and is more balanced on the wrist. The all-important factor of proportion has been achieved and the watch feels absolutely right.

The Dial

Like all replica Audemars Piguet Royal Oak models from 2017 forward, the dial is decorated with a guilloché “Grande Tapisserie” (chequerboard) pattern and features the same layout of the chronograph functions as the 2017 model with two horizontal rhodium-toned counters at 3 and 9 o’clock for elapsed times and a smaller counter above the 6 o’clock marker for the running seconds. The white gold applied hour markers and the hands are identical to the 2017 model with luminescent coating and the date window perched between 4 and 5 o’clock has a purple background to match the dial.

However, the novelty here is the colour of the dial. It’s purple, unequivocally purple, well “plum purple” if you want to be exact, the kind of purple you might have worn on your 1970s bell-bottoms. It might not be the first purple dial in the Royal Oak line-up, but it is the first time Audemars Piguet mixes frosted gold armour with a purple dial.

The Movement

Turning over the watch reveals a sealed caseback but, rest assured, Audemars Piguet’s in-house calibre 2385 beats below cover – note that this movement is based on the architecture of the Frédéric Piguet 1185. An automatic, integrated column-wheel chronograph with tri-compax layout, the movement beats a frequency of 21,600vph/3Hz and provides a power reserve of 40 hours for the chronograph, hours, minutes, small seconds and date functions.

Price

The Audemars Piguet Royal Oak Frosted Gold Chronograph (ref. 26331BC.GG.1224BC.01) is a boutique-exclusive edition of 200 watches retailing for EUR 64,800. But Audemars Piguet Chronograph replica is very cheap in our store. On http://www.d4l.co/audemars-piguet.html, we can offer all kind AAA replica AP watches, look high end and all details is 1:1. The movement is high quality Asian clone quartz movement to make sure all functions work and stable. For Christmas, all watches 10% off.

Introducing the AUDEMARS PIGUET Royal Oak Double Balance Wheel Openworked Ceramic 41mm Replica

Introducing the AUDEMARS PIGUET Royal Oak Double Balance Wheel Openworked Ceramic 41mm Replica

December 2020 - The Swiss fine watchmaking brand AUDEMARS PIGUET presents the new Audemars Piguet Royal Oak Double Balance Wheel Openworked Ceramic 41mm watch replica 15416CE.OO.1225CE.01 with a dial design full of subtle visual contrasts. For the first time, the Royal Oak Double Oscillator Skeleton features a case and bracelet in black ceramic, hand-finished with the signature Audemars Piguet aesthetic of alternating satin-brushed and polished finishes.

The Case & Dial

The new AP Royal Oak watch replica itself retains most elements of previous replica Royal Oak Double Balance Wheel Openworked models. What we’re looking at today is mostly an evolution of materials and colours. As such, the case still measures 41mm in diameter and features the emblematic octagonal bezel with eight gold screws on top. It has a relatively thin profile of 9.7mm, a hexagonal screw-lock crown and alternation of brushed surfaces and polished accents – features that are kept, despite the new material. The main update concerns the use of black ceramic, a lightweight and ultra-resistant material, for both the case, the bezel, the crown and the bracelet. The caseback is made of titanium.

As we’ve explained on several occasions, the use of ceramic for the replica AP Royal Oak is not a simple task. In order to retain the exact same shape and finishing as a stainless steel or solid gold model, the ceramic Royal Oak watches require an impressive amount of time to machine and hand-finish the parts – the bracelet alone requires 30 hours of finishing, which is five times longer than for the steel version. But clearly, the result is stunning. As you can see in the photos, the black ceramic material is also rather playful depending on the light conditions, reflecting or absorbing ambient light.

Some evolutions are also noticeable on the dial side. While the movement, its decoration and the visible double balance wheel module are retained, the inner flange with a minute track is now treated in black to match the case. The hands and the applied indexes are still executed in 18k pink gold and feature some luminescent material. The complexity of this AP Royal Oak Double Balance Wheel Openworked replica doesn’t hide in the display of this classic 3-hand watch. The star of the show is, without a doubt, the complex regulating organ, highlighted between 6 and 9 o’clock, with its gold bridge and balances, contrasting with the dark grey movement – which, as you can see, is superbly decorated by hand, with sharp inward angles and hand-polished chamfers (among other decorations).

The Movement

The principle of the Double Balance Wheel replica 15416CE.OO.1225CE.01, as we explained in this in-depth video with the CEO of Audemars Piguet, François-Henry Bennahmias, is all about chronometric performance. Placing this double balance wheel device on a classic calibre 3120 allows its benefits to be measured, in comparison to a traditional single balance movement. The idea was to exploit the advantages of having two balance springs, without the issues that come with them. Having a double spring increases precision. However, this construction (when you have two hairsprings on the same side of a single balance) is known to be difficult to adjust and does create extra friction on the balance staff. Taking two springs made of the same alloy and setting them 180° apart cancels this completely, which benefits the overall chronometric performance of the watch.

The rest of the movement, taking aside the skeletonization process and the double balance construction, is close to a classic Calibre 3120, which has been the brand’s core automatic movement for several years. The Calibre 3132 you see here runs at a frequency of 3Hz with a power reserve of 45 hours – shorter than the 3120, as the double balance consumes more energy. 

The watch’s titanium caseback presents the engraving: “Royal Oak Double Balancier” and, through the transparent sapphire crystal, showcases the back of the movement and its 22-carat pink gold oscillating.

Price

The Audemars Piguet Royal Oak Double Balance Wheel Openworked Black Ceramic Ref. 15416CE.OO.1225CE.01 has a price of Euro 82,200 (including VAT) / US$ 80,300 (excluding sales taxes). As the latest model, we are designing, if you are interested in Audemars Piguet watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Omega Seamaster Planet Ocean GMT Deep Black Watch Replica Review

Omega Seamaster Planet Ocean GMT Deep Black Watch Replica Review

The Omega Seamaster 300M and the Seamaster Planet Ocean are Omega's most popular dive watches on the market. Those who are familiar with Omega know that there is also an all-ceramic "high-end series" of Omega dive watches, the Omega Seamaster Planet Ocean "Deep Sea Black" replica (ref. 215.92.46.22.01.001). By comparing it with the regular steel case Planet Ocean, I also found that the all-ceramic Planet Ocean Black has an unusual texture in my hand, with higher value and quality.

The Case

The biggest feature of the Omega Seamaster Planet Ocean GMT Deep Black replica is its all-ceramic design. The entire watch, from the case, bezel, dial, crown, helium valve, clasp, all these visible parts, except for the strap, movement, hands are all ceramic. The "Deep Sea Black" comes in 4 main color schemes (not counting the special models), all black, black red, black blue, black gold, and I'm only talking about the all black model. Different colorways have different treatments for ceramics (like the black-blue model, which is brushed matte). In this all-black model, the entire watch is made of mainly polished ceramic. The case and bezel are extensively polished, and the watch looks very bright in the light, with a more pronounced sense of quality and sophistication than the steel case.

With a diameter of 45.5mm it fits my fairly large wrists perfectly, but I did need a few days to get used to this size. Normally, my watches are a tad bit smaller. The black rubber strap fits like a glove and is comfortable from the first moment when you slide the watch on to your wrist.

Not only the diameter is impressive, the watch is also rather thick. It measures 17.8mm in height and that is a lot. It does make the watch feel a bit top heavy at first, especially on the light-weight rubber strap. "Deep Sea Black" uses tape. The outside of the strap is a canvas-like fabric, the inside is rubber, and the clasp is a folding clasp. 

You’ll also note some dial differences which are important to talk about. The 43mm-wide Omega Seamaster Planet Ocean GMT copy has 24-hour marked rotating bezel, while the Omega Seamaster Deep Black watch replica has a traditional 60-minute diver’s bezel. Omega designed a 24-hour scale into the dial itself – making it a nice hybrid solution for many users. The black ceramic dials are given a new style of Arabic numerals for 2016, and the hands are either 18k white or 18k Sedna gold (with SuperLumiNova luminant material).

The Dial

The polished white gold hands, orange tip and hour markers still give enough contrast to be perfectly readable though. The date is located at 3 o’clock and using a matt black disc with white printing. As you can see above, it contrasts a bit when you look at the dial from certain angles where it [the dial] appears to be shiny.

In low-light conditions, the watch is still perfectly readable and the extra hour hand (GMT) is a feature that I really fancy. The finish of the watch is what you should expect of a watch with this price tag. The case has the typical combination of polished and matt brushed surfaces, like we are used from their lyre lug design. The glossy dial might not be for everyone, as it can look very shiny from certain angles. See below. It is something you just should make up for yourself.

On the dial you will also find the 24 hour track on the rehaut. As I wrote above, the GMT function is something I applaud. Especially if you’re a frequent traveler, it is a very welcome feature.

The Caseback

An exhibition caseback is a good thing because we get to see a very admirable movement used in the replica Omega Seamaster Planet Ocean GMT Deep Black watches. Inside is the in-house made Omega caliber 8906 “Master Chronometer” movement. This automatic Co-Axial movement operates at 3.5Hz (25,200bph) with a power reserve of about 60 hours. This is one of the newer METAS certified movements which also means that it is more or less “fully anti-magnetic.”

Price

The three models of the replica Omega Seamaster Planet Ocean GMT Deep Black in all ceramic (references 215.92.46.22.01.001, 215.92.46.22.01.002, 215.92.46.22.01.003) will be priced at 10,400 Swiss francs, while the Deep Black reference 215.63.46.22.01.001 in 18k Sedna gold and ceramic will be priced at 13,400 Swiss francs. More information, please visit our latest replica Omega watch listing, we are selling almost all model AAA grade 1 :1 cloned Omega watches. For Cyber Monday, all watches 10% off.

Introduction of the Tag Heuer Formula 1 Senna 2020 Special Edition Watch Replica

Introduction of the Tag Heuer Formula 1 Senna 2020 Special Edition Watch Replica

Speaking of Senna, some people will think of the lyrics of Jay Chou's "Confession of a Balloon", a cup of coffee on the left bank of the Seine, but for F1 fans, Senna is "always dropping God". Unfortunately, Senna passed away in 1994 at the age of 34, and became a legend in the memory of the fans. Last year was the 25th anniversary of Ayrton Senna's death, and TAG Heuer launched two limited editions - the Tag Heuer Carrera Calibre Heuer 02T Tourbillon Chronograph Ayrton Senna 2019 Special Edition replica and the Tag Heuer Formula 1 Calibre 16 Elton Senna 2019 Special Edition replica pays tribute to the legendary driver. However, the number of Nairn releases is limited and not all fans can buy it. Now, Tag Heuer is once again releasing a limited edition commemorative watch for Senna, Tag Heuer Formula 1 Senna 2020 Special Edition watch replica, which has naturally received a lot of attention from fans and watch enthusiasts alike.

2020 FORMULA 1 SENNA AUTOMATIC CHRONOGRAPH REPLICA CAZ201B

Tag Heuer's latest addition to Tag Heuer Formula 1 copy, the Senna 2020 Special Edition replica, is available as an automatic chronograph or a quartz chronograph. With a black ceramic fixed bezel with a tachometer scale of 400 km/h, far beyond the usual 240 km/h scale of other bezels, the new Special Edition pays tribute to Senna's legendary ability to challenge and set new records, to the seemingly unattainable speed, and to Tag Heuer's dedication to creating its own ideal timepieces. At 1 o'clock on the bezel, the inscription "SENNA" also stands out.

The Tag Heuer Calibre 16 Chronograph replica CAZ201B.FC6487 is based on the 44mm stainless steel F1 Chronograph. The watch uses a 12-6-9 dial layout, with yellow rings around the inside of 6 and 9 o’clock registers, while the 12 o’clock register features three yellow segments. The registers are in a contrasting black and feature the radial “azurage” patterning. On the anthracite sunray-brushed dial, the yellow element echoes the yellow stitching of the Senna on the bracelet, providing a recognizable color combination that ties the watch to Senna. On the black calfskin strap, the S-shaped embossed motif, also in the shape of a Tag Heuer steel bracelet link favoured by Senna, provides the wearer with a more personalised look. On the steel screw-down case back, we can also see the Senna logo engraved on it. 

This watch is powered by a Calibre 16 automatic movement. The other unique aspect of the automatic model are the yellow rings around the crown and upper-chronograph pusher- the quartz chronograph has neither.

2020 FORMULA 1 SENNA QUARTZ CHRONOGRAPH REPLICA CAZ101AF.BA0637

As we’d showed you above, the quartz chronograph replica may use a similar case to the automatic watch, but is considerably slimmer. Their case diameters are basically the same- 43mm for the quartz Chronograph vs. 44mm for the Calibre 16.

This Tag Heuer Formula 1 Senna 2020 quartz chronograph replica also features a sun-brushed anthracite dial, with three subdials in different positions and a date window tilted to the 4 o'clock position. The yellow decorations everywhere, the Senna logo engraved on the case back, the double S-link steel bracelet, etc. are all very "Senna" style, and the steel folding clasp with double security system and extended clasp is perfect for the racing suit, in fact this is also the style that Senna likes, and can be used daily or on the track!  While the Calibre 16 uses polished steel hands, the quartz model features black hands.

PRICE

The 2020 TAG Heuer Senna Special Edition Formula 1 collection starts at US$2,100 for the Quartz chronograph on the Link-style bracelet, with the Calibre 16 on the leather strap costing US$3,200.

TECHNICAL DETAILS

Model: TAG Heuer Formula 1 Automatic Chronograph

Reference CAZ201B.FC6487

Movement

Calibre 16 Automatic

Case

44 mm diameter

Polished and fine-brushed stainless-steel case

Black ceramic fixed tachymeter bezel

Water-resistant to 200 metres (20 bar)

Dial

Anthracite sunray-brushed dial

Bracelet

Black calfskin strap with black lining and yellow stitching

Model: TAG Heuer Formula 1 Quartz Chronograph

Reference CAZ101AF.BA0637

Movement: Quartz

Case

Diameter 43 mm

Fine-brushed stainless-steel case

Water-resistant to 200 metres (20 bar)

Dial

Anthracite sunray-brushed dial

Bracelet

Stainless-steel S-shape bracelet

As the latest model, we are designing, if you are interested in TAG Heuer watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC and more.

Bell & Ross launches Bell & Ross BR 05 CHRONO replica series

Bell & Ross launches Bell & Ross BR 05 CHRONO replica series

Known for its classic rectangular watches, many of which are inspired by flight instruments, the new Bell & Ross BR05 replica collection from aviation watch specialist Bell & Ross is the epitome of professional timepieces designed especially for the urban elite.

In keeping with the replica Bell & Ross Aviation BR05 watch collection's four design principles - legibility, functionality, reliability and precision - the latest chronograph in particular is a new chapter in the Bell & Ross urban design aesthetic that combines elegance and technical precision.

Chronograph functions

The replica Bell & Ross Aviation 42 mm watch (ref. BR05C-BL-ST/SST) is a new classic in Bell & Ross watchmaking, a new mechanical chronograph that is perfectly attuned to the rhythms of urban life, allowing the urban elite to master the minutes and seconds with unerring precision.

The replica Bell & Ross BR 05 chronograph replica features a 42mm case that is round and square in shape, in keeping with the brand's uniquely simple geometric aesthetic and style.

The copy BR 05 Chronograph is the latest expression of Bell & Ross' virile aesthetic. It is a flawlessly decorated timepiece with a strong personality, full of sculptural and architectural lines, strong and rigid, and modern and elegant.

The case is meticulously decorated, with a finely honed flat surface and polished bevels that accentuate its lines. The technical and design details of the BR05 Chronograph replica are the essence of its style and character.

One-piece design

The case and bracelet of the Bell & Ross BR 05 collection replica are one and the same," explains Bruno Belamich, creative director of Bell & Ross, "and the new chronograph is no exception. The effect is striking and contemporary," explains Bruno Belamich, creative director of Bell & Ross. "The design, which was popular in the 1970s, has been incorporated into the essence of Bell & Ross," he explains.

The perfectly proportioned lines of the 42 mm case make it stand out on the wrist and are instantly recognizable. The angles of the lugs have been carefully calculated to fit the watch perfectly and provide a secure and comfortable fit on the wrist, allowing the urban elite to control the minutes and seconds in their hands. The chronograph pushers, crown and shoulders are integrated into the contours of the case. The sleek lines of the case are in perfect harmony with its masculine character.

The chronograph is fitted with an integrated steel bracelet or with a blue or black rubber strap for a different look.

Clear and easy to read

The dial layout is clear and contrasting, in keeping with the brand's clear and easy-to-read nature. The minute counter at 9 o'clock and the small seconds counter at 3 o'clock are also inspired by the square and circle design popular in the seventies, while the two counters are decorated with a spiral texture, adding a touch of urban dynamism to the nostalgic style.

Details

Left: BR05C-BL-ST/SRB

Right: BR05C-BL-ST/SST

Movement: Calibre BR-CAL.301. Self-winding mechanical movement.

Functions: hours, minutes, small seconds, date at 3 o'clock, 30-minute counter at 9 o'clock

Case: width 42 mm. Brushed and polished stainless steel. Screw-locked crown. Sapphire caseback.

Dial: Appliquéd numerals and hour markers in black sunburst filled Super-LumiNova®, metal skeletonized hour and minute hands filled with Super-LumiNova®.

Crystal: sapphire crystal with anti-reflective coating.

Water-resistance: 100 meters.

Strap: black rubber or satin-brushed and polished steel.

Clasp: folding clasp. Brushed and polished stainless steel.

Left: BR05C-BU-ST/SRB

Right: BR05C-BU-ST/SST

Movement: Calibre BR-CAL.301. Self-winding mechanical movement.

Functions: hours, minutes, small seconds, date at 3 o'clock, 30-minute counter at 9 o'clock

Case: width 42 mm. Brushed and polished stainless steel. Screw-locked crown. Sapphire caseback.

Dial: Appliquéd numerals and hour markers in black sunburst filled Super-LumiNova®, metal skeletonized hour and minute hands filled with Super-LumiNova®.

Crystal: sapphire crystal with anti-reflective coating.

Water-resistance: 100 meters.

Strap: blue rubber or satin-brushed and polished steel.

Clasp: folding clasp. Brushed and polished steel.

As the latest model, we are designing, if you are interested in Bell & Ross watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Review the Breitling Professional Endurance Pro 44MM Watch Collection Replica

 

Review the Breitling Professional Endurance Pro 44MM Watch Collection Replica

In the last three and a half years, the Professional umbrella has evolved from entry-level aerospace to more versatile products like the rugged Chronospace, the state-of-the-art Exospace and the mighty Emergency - a legendary adventure watch capable of summoning helicopters to understand real-life situations sideways. Given its cool, modern aesthetic and long history of high-precision, multi-functional watches, the Professional collection is the natural home for Breitling Professional Endurance Pro 44mm watch replica (ref. X82310A51B1S1), this time designed with athletes in mind.

Details

As mentioned before, the replica Breitling Professional Endurance Pro watch collection belongs to the Professional line. Each wristwatch from this family is powered by one of the brand’s SuperQuartz™ movements which promises an accuracy that exceeds a standard quartz movement by ten times. The model is also based on the Breitling Spirit watch from the 1970s, which combined a pulsometer feature with a remarkably lightweight resin design. Drawing from the vivid colours of this retro model, the new Breitling Endurance Pro watches feature a black dial with matching black bidirectional rotating bezel engraved with cardinal compass points. The inner bezel is where you’ll reference the clear pulsometer scale in a vibrant colour that coordinates with the watch’s rubber strap and a moulded easy-to-grip crown. Red, blue, orange, white or yellow variations enhance legibility for keeping track of your heart rate, yet also add undeniable sportiness to the rest of the design. The case of a Breitling Endurance Pro watch is crafted from the manufacturer’s Breitlight® technology – an ultra-lightweight, thermally-stable, nonmagnetic, scratch-resistant and anti-corrosive material.

For nighttime use (or whenever referencing the watch in lowlight conditions), the use of Breitling’s Super-LumiNova technology will come in handy. The hour and minute hands have been treated in this coating, and the chronograph second hand is crafted into a red pointer to differentiate it from the main timekeeping indices. The chronograph counters placed in the 10-2-6 layout offer 30 minutes, 1/10th of a second, and small seconds respectively.

The Breitling Professional Endurance Pro copy watch is the spiritual successor to the Breitling Sprint, a chronograph produced in the 1970s that featured a resin case and a pulsometer scale. The Pulsometer scale, theoretically, could aid athletes taking their own heart rate measurements. This feature carries through to the modern Endurance Pro, and so does the use of a non-conventional material for the case. The Endurance Pro is made from Breitlight, which was introduced in 2016. It's 3.3 times lighter than titanium and 5.8 times lighter than stainless steel, which makes it ideal for sporting applications, but it's also interesting from a material science perspective. It's hypoallergenic, lightly textured, and Breitling reports that it "feels warmer to the touch than metal." 

There’s also a choice of colourful ECONYL® yarn NATO straps to purchase separately if you’re in favour of transforming the look of the Endurance Pro on the wrist. 

The Basics

Brand: Breitling Professional

Model: Endurance Pro replica

Reference Number: X82310A51B1S1/X82310A41B1S1/X82310D51B1S1/ X82310A71B1S1/X82310D91B1S1

Diameter: 44mm

Thickness: 12.5mm

Case Material: Breitlight

Dial Color: Black with various color accents

Indexes: Applied Arabic numerals

Lume: Super-LumiNova

Water Resistance: 100m

Strap/Bracelet: Nylon and rubber strap options

The Movement: Breitling Caliber 82

Functions: Hours, minutes, seconds, chronograph, date

Diameter: 30mm

Thickness: 5.12mm

Chronometer Certified: COSC certified

Additional Details: Thermo-compensated SuperQuartz movement

More information, please visit our latest replica Breitling watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Review 2020 Rolex Sky-Dweller Oyster Perpetual 18-karat Yellow Gold Watch Replica

Review 2020 Rolex Sky-Dweller Oyster Perpetual 18-karat Yellow Gold Watch Replica

Following the sensational launch of the long-awaited 2020 Submariners, Rolex has also tweaked its upscale traveler's watch. 2020 Rolex Sky-Dweller Oyster Perpetual 18-karat yellow gold replica 326238 is novel in that it incorporates the Oysterflex, the first watch in the collection to include the brand's high-performance, high-flying, and high-performance Oyster Perpetual Sky-Dweller. The elastomer bracelet is available. Unlike the Submariner, the size of the Sky-Dweller has not increased and there are no changes to the case or dial. The ambassador of the new Sky-Dweller is the 18-karat yellow gold model with a bright black dial, although there are several configuration possibilities, including the Everose / Chocolate version also shown here.

Case And Dial

The robust 42mm Oyster case is crafted from a solid piece of 18k yellow gold or Everose gold, and is waterproof to depths of 100 metres. The screw-down Twinlock winding crown and the hermetically screwed-down caseback ensure the case’s water-resistance. The unique rotatable Ring Command bezel is rendered in typical Rolex style with hallmark fluting. The dial is bright black with a sunray finish and features applied hour markers in gold to match the case, all treated with Chromalight that emits a long-lasting blue glow in the dark. The gold hour and minute hands are skeletonised at the base and also treated with Chromalight at their tips. In contrast to the glossy sunray finish of the black dial, the second time zone disc is slightly recessed and features a sandblasted finish.

Function

The Sky-Dweller, one of the most complicated models developed by Rolex, was presented at Baselworld 2012. A watch designed for globetrotters, the replica Rolex Sky-Dweller is a functional travel companion with a second time zone and annual calendar, and a unique “Ring Command” bezel to set the functions. What sets the Sky-Dweller replica apart from so many GMT watches is its deceptively simple display made possible by an extremely complex movement protected by no less than 11 patents. Unlike the GMT-Master originally designed for Pan Am pilots, the Sky-Dweller is dressier and targeted to high-flying travellers.

The display of the Rolex Sky-Dweller 42mm watch replica is highly intuitive: local time is displayed with the 3 central hands; the second time zone or reference time is displayed on a rotating 24-hour disc in the centre of the dial and indicated by an inverted red triangle; the date is displayed at 3 o’clock under a classic Cyclops lens; the month is arranged in 12 small apertures on the periphery of the dial at the tip of the indices which change from to white to red accordingly. The annual calendar automatically differentiates between 30 and 31-day months, meaning that only one adjustment is required a year, on 1 March.

Not only is it one of the easiest-to-consult GMT and calendar displays, but it is also one of the easiest-to-adjust thanks to the unique rotating Ring Command bezel. Instead of incorporating a crown with multiple positions to set the different functions, or relying on pushers tucked into the caseband, Rolex developed a unique system of adjustment via the bezel. The Ring Command bezel can be rotated to select the date, the local time and the reference time, which can then be adjusted in either direction using the winding crown.

Oysteflex Bracelet

Although it is made from elastomer, the Oysterflex bracelet cannot be written off as a conventional black rubber strap. A hybrid between a metal bracelet and a rubber strap, the Oysterflex is made up of flexible metal blades in titanium and nickel which are over-moulded with high-performance black elastomer. This combination ensures the resilience of a metal bracelet with the flexibility and comfort of a rubber strap, especially thanks to the “flaps” on the back that hug the wrist. The Oysteflex bracelet has a folding Oysterclasp in yellow or rose gold and features Rolex’s proprietary Glidelock extension system with six notches of 2.5mm allowing the length of the bracelet to be adjusted up to 15mm without tools.

Calibre 9001

Developed and manufactured by Rolex, automatic calibre 9001 is regarded as one of the most complex movements created by the brand. Fitted with Paraflex shock absorbers, a large variable inertia balance wheel and the anti-magnetic blue Parachrom hairspring, the movement is shock-resistant and designed to weather everyday wear and tear. The Rolex Sky-Dweller replica has also earned COSC chronometer certification and Rolex’s own Superlative Chronometer certification and comes with an international five-year guarantee. The movement beats at 4Hz and provides up to 72 hours of power reserve.

The Basics

Brand: Rolex

Model: Sky-Dweller replica

Reference Number: 326235 (Everose) 326238 (yellow gold)

Diameter: 42mm

Case Material: 18k Yellow Gold and Everose gold

Dial Color: black, champagne, white, and chocolate

Indexes: Applied markers

Lume: Chromalight

Water Resistance: 100m

Strap/Bracelet: Oysterflex

The Movement: Caliber 9001

Functions: Center seconds, minutes, and hours; independently settable hour hand and home-time indication by 24-hour ring; annual calendar

Diameter: 33mm

Power Reserve: 72 hours

Winding: Automatic

Frequency: 4 HZ

Jewels: 40

Chronometer Certified: Rolex Superlative Chronometer Certification

Price: $41,500 (Everose), $40,000 (yellow gold)

As the latest model, we are designing, if you are interested in Rolex watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Patek Phillippe, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Introducing Replica Omega Speedmaster Grey Side Of The Moon Co-Axial Chronometer Ceramic Watch

 

Introducing Replica Omega Speedmaster Grey Side Of The Moon Co-Axial Chronometer Ceramic Watch

This ceramic-cased Omega Speedmaster is known as the Omega Speedmaster Grey Side Of The Moon 44.25 mm ceramic watch replica. In some ways, it is a new flavor of the dark side of the moon, but in other ways, it only continues what the famous "DSOTM" began.

Grey Side Of The Moon

While the Omega Speedmaster Grey Side Of The Moon watch replica (previously known as the Lunar Dust) is ceramic, it is not black and has a platinum colored dial. In fact, the dial isn’t just colored platinum, it is actually plated with platinum. Together with gray alligator strap it makes for a unique and new sexy Omega Speedmaster replica style that we love.

The interesting thing about the Omega Speedmaster Lunar Dust watch replica is that when I first saw it I was not wowed like when I saw the Dark Side Of The Moon for the first time when meeting with Omega. That fact made me wonder if it was because the “Lunar Dust” wasn’t as nice or if the appeal was fleeting. What I think was happening is that the Dark Side Of The Moon was so novel to me, it was as surprising as it was interesting. Perhaps I was expecting something like the Grey Side Of The Moon, but the more I look at it the more I like it.

Unlike the easy good looks of the Omega black Dark Side Of The Moon watch replica, this new version has some more distinctive coloring. Perhaps that also explains why it has less immediate appeal, but continues to grow on me the more I think about it. In a way, the unique dial and color of the case makes it even more novel than the imation Omega Speedmaster Dark Side Of The Moon.

Gray Ceramic Case

The Omega Lunar Dust watch replica shares its 44.25 mm case and technical specifications with the replica Omega Speedmaster Dark Side of the Moon. The case is made from a solid block of white ceramic that is treated with a plasma technology. We are not talking about a surface coating, but a treatment that tints the entire ceramic. If you cut the case in half, you’ll see that the grey tone is through and through. That means: no risk of fading colours or to see some white after the case has been scratched (something that will probably never happen, because ceramic is close to be scratch-proof). On the photo bellow, you can see the different steps of manufacturing.

The colour obtained is a metallic grey, darker than stainless steel or titanium, reminding us of the colour of a moon stone. The difference between the entire black ‘Dark Side of the Moon’, and the new ‘Lunar Dust’, is that the dial on the latter is made of a solid piece of platinum that is finely textured and is a bit iridescent. The bezel, crown, pushers, case-back and pin buckle on both models are made in ceramics. The hands and indexes, with the classical Speedmaster Professional design, are black coloured and filed with super-luminova. Even the engraved tachymeter on the  bezel is filled with super-luminova.

Caliber 9300 Movement

The Lunar Dust features Omega’s in-house Caliber 9300, a self-winding movement that is also used in the Moonwatch Chronograph replica and the Seamaster Planet Ocean Chronograph replica that we reviewed for you here. It features:

an integrated chronograph function (meaning that all the levers and gears are not in a module on top of a base movement, but are fully integrated into the movement’s construction)

a silicon balance spring that is antimagnetic

the co-axial escapement that allows very good chronometric performance and the COSC chronometer certification

two mainspring barrels that deliver more than 60 hours of power reserve

a column wheel and a vertical clutch system to engage the chronograph

The movement, visible through the caseback with boxed sapphire crystal, is finished with elegant arabesque Geneva waves. Like the IWC Portuguese Chronograph Classic we reviewed a few weeks ago, it’s a two-register chronograph that indicates the elapsed minutes and hours on a single subdial. It’s not very easy to see in these photos, but there are two hands (one for the elapsed hours, one for the elapsed minutes) in the subdial at 3 o’clock.

This movement has not yet benefited from the new antimagnetic technologies, like those used in eight new Master Co-Axial calibers, which are able to resist to magnetic fields up to 15,000 Gauss. The Omega Speedmaster Lunar Dust watch replica comes with a matching gray alligator strap.

Price

The Omega Speedmaster Lunar Dust watch replica will be available at the end of the year for a price of CHF 10.500 before taxes, approximately CHF 500 more than the black version. As the latest model, we are designing, If you are interested in Omega watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Introducing the Omega Seamaster 300M Nekton Edition 42mm Watch Replica

Introducing the Omega Seamaster 300M Nekton Edition 42mm Watch Replica

OMEGA pays tribute to the non-profit marine research foundation dedicated to the exploration and protection of the world's oceans with the new Omega Seamaster 300M Nekton Edition watch replica 210.32.42.20.01.002, a 42mm diving watch water-resistant to 300m, featuring a screw-down crown and helium valve and certified to withstand temperatures of up to 15,000 Gauss.

Submersible 'Seamaster 2'

Omega, which is very generous in allocating time and budget to social responsibilities, has been in cooperation with Nekton, a non-profit research organization that protects the oceans, since 2018. In line with this ongoing partnership, the brand will continue to support the "First Descent" project, which started in 2019 and consists of a series of tasks to explore and protect the Indian ocean, next year.
An approach greatly admired by OMEGA’s President and CEO, Mr. Raynald Aeschlimann, who sees clear parallels with Nekton and the watch company he leads. "Our friends at Nekton are protecting the ocean with the global goal of 30% protection by 2030. As a pioneering brand with a long history of pushing at the boundaries of what is possible, we have the utmost respect for this bold, confident vision, and we’re thrilled to help make the goal a reality".
When it came to protecting the oceans, they decided that the most suitable model for this task was, of course, the Omega Seamaster Diver 300M replica. The brand's flagship collection, Seamaster, has a significant place in Omega's story with the oceans. The Nekton team pays homage to Sir Peter Blake, a legendary Omega friend who devoted himself to protecting the seas, by naming the research submersible 'Seamaster 2'.

Black Ceramic (Zr02) Dial

The laser-etched black ceramic (Zr02) dial of the Omega Seamaster Diver 300M Nekton Edition men's watch replica is decorated with matte finishes and shiny wave reliefs. The unidirectional Grade 5 titanium diving bezel is also laser-engraved. The case back features the submarine Nekton's embossed figure, the signature of the NAIADLOCK locking system, and the inscription Diver 300M, to praise the hard work of the foundation.

Elephant in the room

Many people commented on this watch on social media and in our comments section below the initial article. Let’s get rid of the elephant in the room first — the bezel. Omega used a bezel with raised numerals in 1993 for the full-gold Seamaster 300M. But there are people who see this for the first time on an Omega today and comment that it is a Yacht-Master copy. It’s a strange take, given that there is only so much you can do with a bezel and that there are many more examples of positive relief bezels beyond the Yacht-Master that don’t come in for the same flak.

I have never heard anyone call the Oris, Blancpain, or even Paul Picot watches with a bezel like this a Yacht-Master copy. Additionally, this bezel on the Omega Seamaster 300M imation is, of course, a proper diving bezel. Conversely, the bezel on the Yacht-Master is bi-directional and therefore pretty useless for dive timing. I used to have a Yacht-Master 16622 myself. While I liked it at the time, I feel there is little that these watches have in common other than how the bezel looks.

Steel and Titanium

The case of this new replica Omega Seamaster Diver 300M Nekton Black Ceramic watch is made of steel, but it uses titanium for its bezel. Why? I asked and Omega replied that it has to do with the manufacturing process. Using laser ablation for the finish of the bezel will affect the structure of the stainless steel, resulting in discoloring. Also, by changing the structure of the material, it becomes prone to corrosion. By using (grade 5) titanium, there are no issues with discoloring and corrosion. Creating the entire watch of titanium was not according to the plan. It would have a negative effect on the price tag and the 300M Bond edition is already in titanium.

Bracelet versus rubber strap

There’s little wrong with the 9-row bracelet for this Omega Seamaster Diver 300M Nekton replica. But yet, I prefer it on the rubber strap. The rubber strap gives a sportier look and a nice contrast with the steel (and titanium). I feel that this watch on the bracelet is a bit too metallic, for my taste. However, if I am to purchase this new Omega Seamaster Diver 300M Nekton edition replica, I think I will buy it on a bracelet and add the rubber strap separately. Based on experience, I know it is often more expensive to buy a steel bracelet than to add a separate strap. Just in case I change my mind in the future. When you’re very confident you never want to wear it on the bracelet, it will save you a few hundred for sure.

Nekton Submersible caseback

The submersible that the Nekton Foundation is using, goes by the name of Seamaster 2. Named after the ship that Omega ambassador Sir Peter Blake sailed. I’ve touched upon that in the introduction article the other week as well. The Seamaster 2  is embossed on the caseback of this new Omega Seamaster Diver 300M Nekton edition copy. Although I wasn’t aware of Nekton before Omega partnered with them, I do think it looks very cool on the watch. Even when I would not particularly interested in Nekton, I would not mind having it on the caseback of the watch. This also results in being unable to see and enjoy the looks of the movement, of course.

Omega Caliber 8806

In the initial announcement, I wrote that this watch had a movement with a “special luxury finish”. Although it does have a very nice finish, I interpreted the press release from Omega in the wrong way. I thought it had a finish different from the other caliber 8800 movements. It doesn’t. It has the Geneva waves in arabesque as you can see above. Caliber 8806 is a nice movement to observe, but you’ll have to work with pictures of it. It is the same movement as used in the titanium Omega Seamaster 300M Bond. What I like about it, is that it doesn’t have a date complication. It keeps the dial very clean. And in all honesty, I don’t need a date on a watch. When I wake up in the morning, I see the date on my iPhone, and don’t need to be reminded everytime I look at my watch.

On the wrist

In the past, I have been very enthusiastic about the imation Omega Seamaster Diver 300M collection. I have a couple of the old 300M models, and I am sure I will add a newer version to my modest collection as well. While the titanium 300M Bond edition has a lot of cool ingredients, there’s only so much I can spend on watches every year. My days in banking are over and on top of that, I have a family now.

But, this Omega Seamaster Diver 300M Nekton imation is a very interesting addition to the 300M collection and with a more attractive price tag. I enjoyed the steel and Sedna gold 300M on rubber (click here) and made it one of my favorites in the past, but this Nekton edition makes me rethink that. The matte dial, the titanium positive relief bezel, and the no-date display make this a winning combination. The 42mm size is perfect for my 19cm wrist and especially on the rubber strap, which is soft and comfortable to wear.

Price

The price is significantly higher than the normal 300M version, which has a retail price of €4,600. This Nekton edition has a price tag of €5,500 on rubber (210.32.42.20.01.002), and €5,800 on steel (210.30.42.20.01.002). The Nekton will be available starting in October 2020.
More information, please visit our latest replica Omega watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Review The New Hublot Big Bang One Click Marc Ferrero Replica

Review The New Hublot Big Bang One Click Marc Ferrero Replica

For the second artistic collaboration with Marc Ferrero, Swiss luxury watch brand Hublot invited the artist’s most symbolic work "lipstick" to return to the Hublot Big Bang One Click 39mm Marc Ferrero watch replica on.

Black and White

In white or black, symbolizing inseparable complementarity, it illustrates the universal duality of day and night. An essential white that is subtle/minimalist, seductive without being a seducer. A deep black that is audacious and magnetic. Two watches to remind us that the day without the night is not a day, and that the night without the day is not a night.
“I love the power of black and white. Shade and light. Yin and Yang. One is profound, unclassifiable, eternal. The other is subtle, ethereal, timeless. They symbolize antitheses and complementarity. Choosing black and white means getting straight to the point without an excess of tonalities. The black and white make ‘Lipstick’ even more graphic and its red lipstick—more magnetic” said Marc Ferrero.

From Color to Black and White

This time, the artist known for his typically colorful palette tells a story in black and white, in the form of two limited-edition numbered models in a run of 100 pieces. First, ‍Hublot Big Bang Marc Ferrero Steel White replica in satin-finish polished steel and resin, with a lacquered dial and calf and rubber strap, all in white.



The other, Hublot Big Bang One Click 39 mm Marc Ferrero Ceramic Black & White watch replica with a lacquered dial and calf and rubber strap. Two opposites that attract and complement each other. Marc Ferrero conveys the message of a free woman in this iconic duo of watches, by affixing his work from the dial and extending to the strap.
Playing with contrasts, only the lipstick asserts itself in color, in a flashy red, a reminder that, underneath the large black glasses, “Lipstick” is paying tribute to the woman of the 21st century. A heroine of modern times, multifaceted, assured and enigmatic. A woman who dares to do anything, directly, and without subterfuge.

Technical specifications

‍Hublot Big Bang One Click 39 mm Marc Ferrero Ceramic Black & White Replica
Reference: 465.CX.1120.VR.1204.LIP20
Case: Satin-finished and polished black Ceramic
Diameter: 39mm
Thickness: 12.55mm
 Water resistance: 10 ATM (100m)
Case-Back: Polished black Ceramic, Engraved “LIMITED EDITION” XXX/100
Bezel: Polished black plated Ceramic, Set with 42 diamonds for ~1.00ct
Dial: Black and white lacquered dial designed by “Marc Ferrero”
Movement: HUB1710, Self-winding movement
Frequency: 4Hz (28’800 A/h)
Power reserve: ~ 50 hours
No. of Components: 166
Jewels: 27
Strap & Buckle: Black and white Calf leather and black Rubber strap, designed by “Marc Ferrero”, Black Alligator and black Rubber strap with black stitching, Stainless Steel deployant buckle clasp
The price for the Hublot Big Bang One Click 39 mm Marc Ferrero Ceramic Black & White Ref. 465.CX.1120.VR.1204.LIP20 is 18,400 CHF/ 19,100 EUR/ 19,400 USD/ 16,000 GBP and is limited edition to 100 pieces.



Hublot Big Bang One Click 39 mm Marc Ferrero Steel White Replica
Reference: 465.SX.2020.VR.1204.LIP20
Case: Satin-finished and polished stainless-steel
Diameter: 39mm
Thickness: 12.55mm
Water resistance: 10 ATM (100m)
Case-Back: Satin-finished stainless-steel, Engraved “LIMITED EDITION” XXX/100
Bezel: Polished stainless-steel, Set with 42 diamonds for ~1.00ct
Dial: White lacquered dial designed by “Marc Ferrero”
Movement: HUB1710, Self-winding movement
Frequency: 4Hz (28’800 A/h)
Power reserve: ~ 50 hours
No. of Components: 166
Jewels: 27
Strap & Buckle: White Calf leather and white Rubber strap, designed by “Marc Ferrero”, White Alligator and white Rubber strap with white stitching, Stainless Steel deployant buckle clasp

The price for the Hublot Big Bang One Click 39 mm Marc Ferrero Steel White Ref. 465.SX.2020.VR.1204.LIP20 is 17,400 CHF/ 18,000 EUR/ 18,300 USD/ 15,200 GBP and is limited edition to 100 pieces. As the latest model, we are designing. More information, please visit our latest replica Hublot watch listing, we are selling almost all model AAA grade 1 :1 cloned Hublot watches.

Introducin the Omega Seamaster Planet Ocean 600M Watch Replica For 36th America's Cup

Introducin the Omega Seamaster Planet Ocean 600M Watch Replica For 36th America's Cup

Like modern sailors, modern divers may still not officially rely on traditional analog instruments strapped to their wrists, but as any habitual tool watch wearer will tell you, that's not the point. For such enthusiasts, even with this year's shortened regatta calendar, Omega hasn't stopped launching a new limited edition Omega Seamaster Planet Ocean 600M America's Cup Edition watch replica built to commemorate the 36th America's Cup.

OMEGA And The America’s Cup

The America’s Cup is renowned as the oldest trophy in international sport and since 1851 is considered to be the most prestigious sailing race in the world. The concept goes that a trophy awarded to the winner of the America’s Cup match races between two sailing yachts. One yacht, known as the defender, represents the yacht club that currently holds the America’s Cup and the second yacht, known as the challenger, represents the yacht club that is challenging for the cup. Due to its prestige, the America’s Cup attracts the world’s top sailors, yacht designers as well as large sponsors.
2021 will see the 36th edition of the America’s Cup where Defender Emirates Team New Zealand will be racing against the winner of the Prada Cup, the Challenger Selection Series, with the winner being the first team to score seven points. This edition will also be the third time in history that Omega serves in the prestigious sailing race, ever since the brand began its partnership with Emirates Team New Zealand and legendary sailor Sir Peter Blake in 1995. In addition to sponsoring Team New Zealand, Omega has been appointed the official timekeeper of the 36th edition of the America’s Cup.

The Dial

Looking at the dial, the Arabic numerals are actually blue with a red varnish on top. This produces a noticeable three-dimensionality which is quite striking. Turning the dial in different directions produces new and interesting viewing angles. I like to think this also has something to do with the size of the numerals themselves. The dial might be large, but the numerals are actually quite demure relative to the rest of the dial.  As a result, the numerals provide a nice pop of red as opposed to being the main attraction.
Between the red numerals, red minute hand, and thick blue surrounds on the hour markers and hands, viewing the time is easy. Now, I'm no yachting man (though I play one on TV), but I have to think such legibility is paramount and essential for elite yachting competition. The white dial has its own little quirks as well, depending on the light. Sometimes it has a smooth, almost lacquer-like texture, while other times it gives off the briefest indication of a silvered metallic sunburst effect. Both the Omega wordmark and logo are applied in blue. The blue application doesn't necessarily shine or reflect, but rather exudes a shimmer or sparkling effect.
On the dial, the trapezoidal markers are white, lume-filled, and surrounded in blue, while at 12, three, six, and nine, the markers are square-shaped. Each of the markers are concave towards the center which provides some really interesting geometric detail to an otherwise straightforward aspect of the watch. The date complication – often a point of contention – works nicely here. The surface area of the date window appears to take up effectively the same space as any one of the numerals. In doing so, the overall layout maintains symmetry and consistency. Would it have been cool for the numbers on the date wheel to have been red, or even in a roulette-style layout? Sure, but as it stands, I still think the white on white works well.

The Case

With its 43.50mm case and its diving credentials, this limited edition is technically no different from the third generation PO 600m introduced in 2016. This new version of the replica Omega Seamaster 43.5 mm watch (more an update than a brand new watch) was the occasion for Omega to demonstrate its technological savoir-faire in materials and watchmaking, as both displayed great innovation spirit. In this instance, the Omega Seamaster Planet Ocean 600m America’s Cup watch replica retains the modern and technical character of the model and adds some unique touches to make this watch a regatta-oriented model.
Starting with the case, we have a solid, well-executed watch that, as always with the PO 600m, oozes quality and robustness. You can hardly fault this watch, as the materials, the adjustments and the assembly are simply excellent. The steel case is classical Omega, with twisted lugs and brushed surfaces enlightened by a polished bevel running from one lug to the other. The watch is hefty and toolish in its dimensions, with a 16mm height. Yet, the case is superbly designed with short lugs and fine integration of the strap that allows for a watch that is balanced on the wrist. It certainly makes a statement but not in the detriment of comfort.
As all Planet Ocean 600m models replicas, this America’s Cup edition features a domed sapphire crystal with efficient anti‑reflective treatment, a screw-in crown and a screwed caseback, all of that to guarantee a solid 600m or 2,000ft water-resistance. At 10 o’clock is a Helium Escape Valve making this watch suitable for saturation diving.

The Strap

Complementing the regatta-ready looks of this limited Omega Seamaster Planet Ocean 43.5 mm watch replica is a blue rubber strap with a textile-like structure, a red lining and white stitching. Soft and ergonomic, this strap is secured by a stainless steel folding clasp with security push-buttons.

The Movement

Under a specific sapphire caseback with the logo of the 36th America’s Cup transferred is the in-house and high-tech calibre 8900. This automatic movement comes with all the modern features of a Master Chronometer watch, meaning a co-axial escapement beating at 25,200 vibrations/hour, silicon and non-ferrous parts all over and a magnetic-resistance up to 15,000 gauss. A twin-barrel architecture allows for a comfortable 60-hour power reserve. The movement is decorated with Omega’s signature Arabesque Geneva stripes and blackened screws. The precision of the movement is certified by Omega’s internal chronometer institute, approved by METAS.

Summary

Overall, this watch looks like a tank. After wearing and handling it, I developed one consistent thought: this thing is sturdy and built to last. The watch runs a lot, sure, but surprisingly, it all coalesces together. Omega has provided a wildly colorful design for the ETNZ, but anyone can enjoy it. The Omega Seamaster Planet Ocean 600m America’s Cup watch replica is a limited edition of 2,021 pieces and will be priced at EUR 6,600 or CHF 6,500.
As the latest model, we are designing, if you are interested in Omega watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Introducing new Omega Speedmaster Dark Side of the Moon Alinghi Watch Replica

Introducing new Omega Speedmaster Dark Side of the Moon Alinghi Watch Replica

Omega, which has been involved in the America's Cup since 1995 and is the official timekeeper for the 36th edition of the legendary event, is strengthening its position in the sailing world. Last year, the Biel-based watchmaker announced a partnership with Alinghi, the sailing team founded by Ernesto Bertarelli in 1994. In honor of this alliance, Omega today unveiled its new Omega Speedmaster Dark Side of the Moon Alinghi watch replica 311.92.44.30.01.002, featuring one of the most technologically advanced looks in the brand's history, in keeping with the impressive specifications of Alinghi's yachts.

Speedmaster Alinghi

If this new reference looks a lot like 2018 Omega  Dark Side of the Moon ‘Apollo 8’ edition replica, it should – it’s the same case and movement, embellished with a whole host of design elements that pay homage to the Lake Geneva-based Alinghi sailing team – starting with a carbon fiber dial, the likes of which we haven’t seen on a Speedmaster since the titanium Solar Impulse GMT from the early aughts. But I’ll come right out and say it: the Speedmaster is a lot of things, but it is rarely a sailing watch. As far as I can tell, only once before with the X-33 Regatta produced for the New Zealand ETNZ sailing team back in 2017. Omega does indeed have a long history of producing various regatta and yacht-timing watches with unique complications and unconventional time displays, but they have understandably remained almost exclusively in the Seamaster collection. Even still, the venerable Speedy does make a lot of sense in this capacity – long before it was a moon watch, it was a racing watch built to calculate speed by measuring time over distance. And even in this application, it can certainly still excel.
This isn’t the first time we’ve seen Alinghi special editions make their way into the watchmaking canon. HYT famously partnered with the team on a trio of limited editions starting in 2015. Consequently, we’ve seen the Alinghi logo integrated with watch designs before. The dynamic red wave has always looked quite at home thanks to its circular form, but here Omega takes its integration one step further. On this new Omega Speedmaster replica, the Alinghi team logo is printed on a disc that occupies one of the three sub-dials.

Red

The red from the Alinghi’s logo has been carried over into the rest of the design for this edition. While the Apollo 8 had yellow accents, this Alinghi has red ones. The most obvious link to Alinghi is, of course, the rotating logo in the 6 o’clock subdial. Red can also be found on the hour markers, “Speedmaster” wording, chronograph hands, and the “Tachymetre” wording on the ceramic bezel.
The minute recorder at 3 o’clock shows the 4 and 5 minutes “tactical time display” in red as well. While I was not immediately convinced by the yellow of the Speedmaster Apollo 8 replica, the red is far more digestible. The Speedmaster Alinghi replica comes on a black and red perforated (racing) strap, made of rubber.

Dark Side

I wish Omega had been more cautious with the Dark Side collection from the start. In the first few years, Omega introduced quite a few variations. In hindsight, I think a slower, more thoughtful approach might have helped define the collection better. The Omega Apollo 8 replica was the first iteration of the Dark Side of the Moon that I truly love and consider it added value to the first DSoTM. This Omega Speedmaster Alinghi replica is the next addition that I think works really well. Even if you have no real connection to sailing or Alinghi, the red accents might be your thing. But the best is perhaps yet to come.

Features

Now, it might have have been awfully cool for the luminous tachymeter scale to read in nautical knots rather than the traditional land & air-based miles-per-hour scale now emblematic on the Speedy, but other embellishments have been made to accommodate the Alinghi crewmen: particularly the 30-minute totalizer at 3:00 which places a greater emphasis on its first five minutes, enabling the skipper to dial in his starting sequence and hit the start line at just the right moment. The 12-hour totalizer at 6:00 is swapped out for a red anodized disc in the shape of Alinghi’s logo – a cardinal triangle at the top of the disc lets the viewer know when it has been zeroed, or how many hours have elapsed since the chronograph was started. Another neat team callout exists on the dial and caseback, where Omega’s once again deployed its laser-ablation techniques (where lasers are used to remove surface material to produce a honeycomb effect on the mainplate and barrel bridge, not unlike the pattern that comprises the carbon fiber skeleton of the hull of Alinghi’s TF35 catamaran.

Caliber 1865

This movement is based on the hand-wound caliber 1861, a hand-wound chronograph movement produced in-house with cam-operated mechanism, 3Hz frequency and 48h power reserve. This Omega Calibre 1865 retains the classic Swiss lever escapement.. The looks are slightly different though! Just like we saw with the cratered caliber 1869, caliber 1865 is all about fast catamarans. The inspiration for the movement comes from the TF35 catamaran. Caliber 1865’s manipulate and barrel bridge are patterned with a honeycomb effect, matching the interior of Alinghi’s TF35 carbon hull. All the bridges of the hand-wound movement have been decorated (also by laser ablation technology) with a carbon pattern.
The use of a thinner movement also means that this is much flatter than usual for the Dark Side Of The Moon Watches replicas, which typically come in at 44.25mm x 16.14mm. The DSOTM Alinghi is 13.80mm thick, which represents a significant height reduction (2.34mm) and should make for a much-altered wrist experience over the standard Dark Side Of The Moon watches.

Specifications

Brand: Omega
Model: Speedmaster Dark Side of the Moon Alinghi replica (ref. 311.92.44.30.01.002)
Dimensions: 44.25mm
Water Resistance: 50 meters
Case Material: Ceramic
Crystal/Lens: sapphire
Movement: Omega Calibre 1865
Frequency: 21,000 VpH
Power Reserve: 48 hours
Strap/Bracelet: Black perforated rubber with red contrast stitching

Price

The Omega Speedmaster Dark Side of the Moon Alinghi replica (ref. 311.92.44.30.01.002) joins the permanent collection and isn’t limited in production. Availability in stores isn’t yet confirmed. It will be priced at $10,800 USD.
As the latest model, we are designing. If you are interested in Omega watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC, Tag Heuer and more.

Review the New Omega Constellation Gents’ 41mm Watch Replica Collection

Review the New Omega Constellation Gents’ 41mm Watch Replica Collection

In keeping with the Manhattan-inspired design introduced in 1952, the new Omega Constellation Gents replica retains its most iconic features, such as the fact that at 3 o'clock and 9 o'clock, it is the perfect place to start. Now, here we are to see the replica Omega Constellation Gents' watch collection get new 41mm variants with updated cases, dials, and movement. This new version of the Omega Constellation replica responds to today's demands with a bolder – yet classier attitude, which should appeal to the younger generation.

Elegant Dial

At first glance, the dials of these new timepieces are luxurious and elegant. These replica versions’ dials also have a subtle detail: a sunbrushed motif emanating not from the center but from the applied star at 6 o’clock, a star that has been present in every Constellation since 1952. In place of the roman numeral VI indices, you can find the hallmark trapezoidal date window, which is a perfect fit with the unusual case shape of the timepiece.
Furthermore, this new collection sports fresh and vibrant dials colors from silver to a deep blue and black gradient dial. My personal favorite is the dial of the steel and black ceramic bezel variant. Its silver textured dial adds sophistication to an already elegant watch.

Omega Constellation Gents replica watch in Ceragold and Blue (Ref. 013163412103001)

The Case

The new Omega Constellation Gents replica models — whose cases are crafted in stainless steel, 18k Sedna gold or yellow gold, or a combination of both — represent the latest evolution of the Constellation dress watch, which debuted back in 1952 and was notable for its “pie-pan” dial. The redesigned version that followed it in 1982 established the barrel-shaped case with four “claws,” half-moon facets at the top and bottom, mono-link bracelet, and indices on the bezel — all elements that have factored into every version since, including the softer, rounder 1995 iteration, the enlarged “Double Eagle” models of 2003, and the previous revamp in 2009. These new 41-mm men’s models, however, are at the moment available only on straps rather than bracelets.

Omega Constellation Gents replica watch in Gold and Black (Ref. 013163412101001)

Calibre Omega 8900

Calibre Omega 8900, revealed through a sapphire crystal caseback, represents some proper horological muscle-flexing, as Omega does it. Anti-magnetic to 15,000 Gauss and put through the METAS-certified Master Chronometer in-house tests, the Constellation Gents’ 41mm replica is pulling no punches. This self-winding caliber, also equipped with Omega’s co-axial escapement and a rotor decorated with Geneva waves, stores a 60-hour power reserve in two series-connected spring barrels.

Calibre Omega 8900

Alligator Leather Strap

The straps are alligator leather with an antibacterial rubber lining for maximum comfort, connected to the case by a metallic link. Omega has designed the case and strap connection so that the wearer can exchange the strap with any of the bracelets from the Omega 39-mm Constellation Gents replica collection.

Empire State of Mind 

New York City, and more precisely, Manhattan, is most likely the fastest-changing skylines in the world (right after Dubai). Therefore, it only makes sense that Omega added a couple of modern touches that cannot go unnoticed in this re-edition. The first unmissable design feature is the slimmed-down baton hands and indexes inspired by the iconic Manhattan Skyline. You’ll recognize the Freedom Tower's triangular facets, visible when you stand at the base of the building.

The bezel’s “claws” were originally designed to hold the crystal in place.

Taking the same design codes of the original Constellation Manhattan from 1982, For this new version of the Omega Constellation replica, Omega has modernized the bezel. The original model had a bezel made of shiny sapphire glass, but the latest editions of the Constellation come with a ceramic bezel, which comes with a steel bezel. The only exception is the steel model whose steel bezel has blackened Roman numerals.
In keeping with their (slightly) more modestly proportioned predecessors, the new Constellation Gents replica has a slimmer bezel with redesigned Roman numerals; a slimmer profile and more elegant finishing for the claws; a subtly reshaped, conical crown; redesigned slim hands and hour markers visually inspired.

Omega Constellation Gents replica watch in Steel (Ref. 013133412106001)

Specifications

Brand: Omega
Model: Constellation Gents’ replica
Dimensions: 41mm-wide, thickness to be confirmed
Water Resistance: 5 bar (50 meters)
Case Material: Variations of stainless steel, ceramic, and 18k Sedna Gold
Crystal/Lens: Domed sapphire crystal front and back
Movement: Calibre Omega 8900
Frequency: 25,200
Power Reserve: 60 hours
Strap/Bracelet: Rubber or leather. Omega says, “Those who prefer an overall metallic look can match their new model with any bracelet in the Constellation 39mm collection, or its full leather strap.” That’s smart.
Price & Availability: $5,850 for the all-steel version, $6,500 for steel with ceramic bezels, $8,650 for two-tone variants and $20,400 for the solid 18kt Sedna Gold Omega Constellation 41mm.
As the latest model, we are designing. More information, please visit our latest replica Omega watch listing, we are selling almost all model AAA grade 1 :1 cloned Omega watches.